#1
|
||||
|
||||
Estes F-22 B/G question.
I'm getting ready to epoxy the twin rudders onto the airframe of an Estes F-22 B/G.
The question is: I don't know which way the little bevel goes--to the front or to the rear. The instructions don't quite show. Thanks! Jeff
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#2
|
||||
|
||||
Quote:
The real one doesn't have it at either end. I would imagine it goes to the front since it is recessed in a slot and would disappear. That way, the correct angle is maintained above the fuselage, yet you get a squared slot with more surface mating for glue to hold better. Links because the first two images are really big. http://upload.wikimedia.org/wikiped...Raptor_JSOH.jpg http://www.amazingtoptens.com/wp-co...2014/04/116.jpg http://upload.wikimedia.org/wikiped...assembling1.jpg
__________________
I love sanding. |
#3
|
||||
|
||||
Thanks! That makes sense.
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#4
|
||||
|
||||
I'll check my kit.
__________________
If it flies, I can crash it! |
Thread Tools | Search this Thread |
Display Modes | |
|
|