|
#1
|
|||
|
|||
Flight profiles do not stop
RockSim v9.1.1f118
When I run a flight profile it re-starts automatically at touchdown. Every time. I've been to Simulation, Edit Selected, Simulation Controls, Simulation End Point. The options to end the simulation are at touchdown, apogee, or recovery deployment. Whatever I set as Simulation End Point, it re-starts at touchdown. What am I doing wrong? Mike
__________________
Clear skies and fair winds, Mike NAR 31689 |
#2
|
||||
|
||||
Nothing that I can tell... RS ALWAYS did that when I simulated stuff...
Course, it's not a BAD thing... you can go back and look at the data bar to the right side of the screen and "freeze" the simulation at certain key points-- find out exactly what the predicted burnout velocity is, coast time, velocity off the rod, time to apogee, deployment time, burnout altitude, max altitude, deploy altitude, etc... even more for staging... Later! OL JR
__________________
The X-87B Cruise Basselope-- THE Ultimate Weapon in the arsenal of Homeland Security and only $52 million per round! |
Thread Tools | Search this Thread |
Display Modes | |
|
|