#11
|
|||
|
|||
Quote:
Thanks Jay / Craig Jay shot me an email too. I'm going to have to make a mental note to check that feature in some of my designs. That's the same feature that Carl just tweaked on the two Semroc Laser-X design files he had too that showed the wrong margins. I threw out a contest entry for EMRR one time because I couldn't figure out what was causing this to happen and I don't ever remember the maximum frontal diameter feature ever being covered in one of the Apogee newsletters. Good to know & thanks guys! .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
#12
|
|||
|
|||
Quote:
Craig, Picked up my AstroVision today at Hobby Lobby with the 40% off coupon. Funny story ..... I took my wife with me to the Hobby Lobby in Hammond today. While I was in the check out line she glanced over at the price tag and said "Hey, how much is that rocket"? When I whipped out my 40% off coupon and it discounted the price of the rocket by $28.00 she said, "hey that's not such a bad deal". I sent her back with another 40% off coupon to pick up a pack of D12-5's. I'm interested in this BARCLONE design and I'd like to build a dedicated D engine booster. I do want to fly the AstroVision at our launch Nov. 17th so I'll probably put it up on it's first few flights with my EnerJet 1340 booster with a Semroc EM-9115 adapter, since that's what I have already built with Semroc series 13 tubing. I'm interested to see the other booster designs you come up with. Also, I weighed my AstroVision camera tonight on my scale and with the batteries loaded and flight ready it is 1.4oz. Much lighter than I thought it would be. .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
#13
|
||||
|
||||
Quote:
Nice going, Steve! Those coupons do come in handy for "special" purchases... Translation: She can use 'em, too... Now I can run the sim over again and get a more accurate profile... The altitude came to 1138' with a slightly reduced Dv, down to 24 FPS, when burning the D12-5. Interesting outcome with the C11-5. I get 565' with a Dv of 8 FPS. That's a really nice, clean flight with low velocity over the top. Both motors seem to need a 48" x 3/16" rod with this bird, as they take at least 33" of guide length to reach flight V. An extra 12" wouldn't hurt. What I really want is a "D" bird that Dv's below 10 FPS, and still gets off easily on a 36" rod. This one comes close, but I want the next one to be a little quicker on the launch.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#14
|
||||
|
||||
Quote:
It also just occurred to my feeble mind that I may want to check this setting on the Andromeda, as the "Maximum Frontal Diameter" is not the nose cone, but the Reactor Shrouds. Jay, if you're reading this, did you ever run the Tau Zero with this changed setting?
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#15
|
||||
|
||||
Quote:
Something to keep in mind....you only get about 15-16 seconds of video with the AstroVision....
__________________
Don NAR 53455 "Carpe Diem" |
#16
|
||||
|
||||
Quote:
I managed 17-18 seconds with mine, but the point is taken. The box says "launch to landing coverage", which is clearly misleading. On this "D" bird, it takes nearly 8 seconds to reach the moment of deployment (about 2+ seconds of burn, and 5 seconds of delay), but once the parachute pops out, it may take over 60 seconds to reach the ground. Even with the "snapshot mode", with only three snaps per flight at 1.5 second intervals, you will take all three snaps well before reaching apogee. The technology of the AV is about three or four years behind the curve; even cell phones from two years ago have better video capability. What the AV has to offer is price - it's relatively cheap if you get one with the HL coupon. I don't think I would have ever shelled out $80 for it, more likely opting for one of those Aipteks instead. Two, if the refurbished prices are still holding. What this camera needs badly is a better frame rate and an SD card slot, so that we could swap out the memory for each flight.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#17
|
||||
|
||||
An Exception to Every Rule...
Quote:
I had RockSim guru Bruce S. "teflonrocketry1" Levison take a look at a relatively functional RS file that I'd cobbled together of the TZ. He said I'd done pretty good in working up a fairly complex design (or something to that effect), and he only tweaked about 4 elements of it to make it "better." One of the things he did was to change the "Nose Cone Base" setting to the "Reference Base Diameter," and specified the outer diameter of the ST-7 body tube, which is 0.759". So I guess my Tau Zero is the exception to *this* rule! Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#18
|
|||
|
|||
What New Rule!
Here I am, all confused again.
So, concider the following Mr. Wizard: = Do I use the Full Frontal Diameter option if the nose cone is larger than the main body and only then?? If not then when?? James Pierson NAR# 77907 |
#19
|
||||
|
||||
Quote:
Obviously, there are some important exceptions to such a rule. Can anyone remember if the Apogee Newsletter ever covered this topic?
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#20
|
|||
|
|||
Quote:
I'm thinking of using the AstroVision on it's first few flights in still mode and saving the video work for my two Aiptek cameras since those record in video mode for 120 secs. I bring my laptop computer to the launch site to download data from my PerfectFlite altimeter anyway so I'll have it with me to download the AstroVision data. I do wish the AstroVision had an SD card slot or more onboard memory for longer record times but considering the 40% off price I still think it's a worthwhile purchase. I'm excited to try it out. .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
Thread Tools | Search this Thread |
Display Modes | |
|
|