#1
|
||||
|
||||
Odd'l Rockets "Pipeline"
So in the last two years (regularly interrupted by Real Life), I managed to misplace the instructions for my Odd'l Rockets "Pipeline" kit.
I think the paint scheme specifies painting the nose cone and 2" of the body tube red. Can anyone confirm/deny/correct that measurement? HCMbanjo? Thanks. .
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#2
|
||||
|
||||
Hi jay -
Has it been two years? The information you need is in the attached picture taken from the instructions. I had to attach it as a JPEG, you can't use PDFs on the forum. (At least I don't know how!) Let me know how it finishes up and flys! All the best -
__________________
Hans "Chris" Michielssen Old/New NAR # 19086 SR www.oddlrockets.com www.modelrocketbuilding.blogspot.com http://www.nar.org/educational-reso...ing-techniques/ Your results may vary "Nose cones roll, be careful with that." Every spaceman needs a ray gun. Look out - I'm the Meister Shyster! |
#3
|
||||
|
||||
Quote:
Thanks for the answer! Quote:
Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#4
|
||||
|
||||
Washer weight source
Quote:
*Much* longer than that, I'm afraid. So about your Odd'l Rockets "Pipeline"... where did you source your washer weight? All I can read on it is "USA" and" 3/8." The specs follow: O.D. = 7/8" I.D. = 3/8" L = 1/8" It hefts like it's lead and it looks vaguely gold-colored. "Inquiring minds want to know!" Quote:
Cheers and blessings,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#5
|
||||
|
||||
Hi Jay,
The washers were purchased from Semroc, before it was purchased by ERockets.biz. Just looked it up on the Erockets website: http://www.erockets.biz/semroc-weig...2-5g-sem-ww-8a/
__________________
Hans "Chris" Michielssen Old/New NAR # 19086 SR www.oddlrockets.com www.modelrocketbuilding.blogspot.com http://www.nar.org/educational-reso...ing-techniques/ Your results may vary "Nose cones roll, be careful with that." Every spaceman needs a ray gun. Look out - I'm the Meister Shyster! |
#6
|
||||
|
||||
Washer weight ID
Quote:
Okay, they're the 2.5g WW-8A washer weights. I checked my Semroc stockpile, and it looks like I bought six dozen 1.5g WW-7As from Carl and the McLawhorns. --I might have enough to do what I need to. .
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
Thread Tools | Search this Thread |
Display Modes | |
|
|