#1
|
|||
|
|||
"SpearChuka
Something I came up with. I got some stuff off "dyaugo" and JUST had to play. I call it the "Spear-Chuka" Main is a BT-55 with BT-50 inner tubefin and BT60 outer tubefin. Gonna cut down a PNC 50 and set it "up" in tube to make boatttail with 18mm opening. At this point its just "tacked together with CA Gell spots. Ill put the glue to it tonight and maybe build the motor mount assemble.
__________________
Scotty Dog NAR 90998 |
#2
|
|||
|
|||
SpearChuka
Some more pics
__________________
Scotty Dog NAR 90998 |
#3
|
||||
|
||||
VERY interesting!
I'd like to see how she flies once you're done. Excellent-looking design.
__________________
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Dale Marshall, San Antonio Texas NAR #90990 Semroc SAM #083 BAR Since 2008 Enjoying model rocketry since 1977. The Spotted Dragon -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- |
#4
|
||||
|
||||
I'm diggin' this rocket myself!
__________________
-Brain SKY AYE ROCKETRY Follow Your Impulse! |
#5
|
|||
|
|||
Motor assemble
Made up the motor assemble tonight. I cut the tip off the PNC 50 so an 18 would slide in it. I then cut the back plug rite off. Put a small pieces of BT-50 on end of PNC and then a 55-50 ring on that. Also used used 4" of BT-20 with 55-20 rings. After its all slid together in main BT it centers itself. I like it. I got the look I was after.
__________________
Scotty Dog NAR 90998 |
#6
|
|||
|
|||
About got -r-done
I played with the idea of little tubes up front and use one as a lug.Well I didnt like the look.Reason is I ended up adding 6" to the main BT as I thought it look short for a "spear". After I looked at the little tubes up front I see that it was taking away the long shaft look I wanted in the first place and added the 6". I was going to use a baffle in it ,But now that I got the Bt 55 coupler only 6" down from top of tube..I donnt think that idea will fly. So,as it is ,Ill thro a lug in one of the innertubes on bottom and one up the BT by cg. then thats it. Leave it along..sometimes less is more!
__________________
Scotty Dog NAR 90998 |
#7
|
|||
|
|||
Spear- Chuka
Well pics dont show much. Thought had the launch on video.Some how its not there. It flew on a B6-4 and was just a perfect flight.!!!
__________________
Scotty Dog NAR 90998 |
#8
|
|||
|
|||
paint
Starting to get some color on it
__________________
Scotty Dog NAR 90998 |
#9
|
||||
|
||||
Quote:
I did not look into this thread until tonight. Now that you have flown it, how did the inner tube fins hold up? The outer fin assemblies look like they will have quite a bit of leverage to deform or even tear the inner tubes. As I was looking at the pictures from the original post down, I was going to suggest reinforcing the inner fin tubes with a balsa fin similar to the ones holding the tubes with the cones inside the outer tubes. Bill |
#10
|
|||
|
|||
Spongy
Quote:
__________________
Scotty Dog NAR 90998 |
Thread Tools | Search this Thread |
Display Modes | |
|
|