#11
|
||||
|
||||
Quote:
Ahhh but they will notice the Bumper stage if you put a 13mm upper stage motor in it! Now...if you want to make a 3" V-2 you just need a Big Daddy (the nose cone matches a V-2 cone perfectly), plus it's 3" in diameter. Then get another Big Daddy nose cone to cut for a tail cone. You just have to shorten the body and make some new fins. I thing BMS has the Big Daddy nose cones but his site seems to be down right now. I have all the parts to do it I just haven't done it yet.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#12
|
||||
|
||||
Ah yeah haha, I was thinking maybe rolling some paper around a 12mm rod for a body tube and maybe an MMX motor, but....
I didn't realise the Big Daddy nose cone was the same profile as the V2.... I have three Scion kits and Two Leviathan kits here, same nose cones. Things just got interesting |
#13
|
||||
|
||||
Quote:
Well...there ya go! Now on mine I made the Wac upper stage is a dummy and my fins are made out of some sheet styrene and I used Tenex to glue them in. On yours you'll just have to cut the slots but I think you'll have to make some extra Wac upper stages 'cause I really don't think you'll be able to get it back. It's just so tiny and it's going to be awfully high when the upper stage ignites. I know my eyes wouldn't see it. As for decals, this was a long time ago so I used automotive pin stripe, masked the black roll pattern and found som "B's" and "8's" in some old dry transfer lettering I had. I have more information plus Peter Always "In the Shadow of the V-2" booklet if you need more information on the black/white roll patterns for rounds B-5, B-7 and B-8.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#14
|
||||
|
||||
Quote:
This may not be helpful for you down under, but 12.2mm is .48". T-4+ from Totally Tubular, if they still have it, is .478... If you really feel the need to stage it, use a MicroMaxx - you probably will not be able to see it anyway. Bill
__________________
It is well past time to Drill, Baby, Drill! If your June, July, August and September was like this, you might just hate summer too... Please unload your question before you ask it unless you have a concealed harry permit. : countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ; Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding... |
#15
|
||||
|
||||
Quote:
Hi Greg, Not sure where I found it. I use Peter Alway's book Rockets of The World for the scale drawing, however, have to keep looking on-line to find detailed drawings for panel lines and rivets. Look at various sites, usually just saving what I find. Mike |
#16
|
|||
|
|||
Quote:
The Bumper drawing previously posted to this thread was created by Jan Kotuha, a scale model rocket builder from Slovakia and a previous world champion. He will be the head scale judge at the European Spacemodeling Championships to be held later this summer. The Bumper WAC was the preferred entry for the FAI scale altitude event for the last several cycles. Tony Reynolds of the USA won the gold medal at the 2004 Championships with a 1/26.5-scale staged Bumper that utilized an Estes B6 in the V-2 booster, staged to a 10mm Delta B2-7 in the sustainer. The winning altitude was well in excess of 2200 feet, and the model resides in the NAR exhibit at the Seattle Museum of Flight today. In recent years the US team has campaigned 1/24-scale Bumper models, finishing in fourth place as a team the last two cycles. Bumpers became so dominant in the event that the rules were changed this year to require larger models, and hopefully a wider spread of entries. James |
#17
|
||||
|
||||
Quote:
Thanks. I usually do the same thing as well. Greg |
#18
|
||||
|
||||
Quote:
Thanks James for the history. I love Bumpers and I hope to convert an Estes Maxi V-2 I have to a Bumper in the future. Greg |
#19
|
||||
|
||||
Quote:
A Maxi V-2 works out to within a few hundreds oF a mm to a BT-20 for the Wac.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ Last edited by sandman : 07-31-2015 at 09:18 AM. |
#20
|
||||
|
||||
Thanks to everyone for the wealth of information shared, I have a few idea's rattling around in my head.
Here in Australia the post office has mailing tubes, 95mm dia(~ 3.75 inches) so I'm thinking bigger again! I must apologise though if I miss-lead anyone with my mentioning of 'scale' in my original post, I'm not into competition scale... stand-off scale is fine by me. Cheers again! |
Thread Tools | Search this Thread |
Display Modes | |
|
|