#11
|
|||
|
|||
Quote:
This page will help you: http://www.oldrocketplans.com/sendscans.htm Thanks!
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
#12
|
||||
|
||||
Quote:
Oh, absolutely! We need all the "etc" we can get! Basically, everything of a printed nature. If the instructions don't include a parts list with part numbers, maybe include a simple txt file showing what the kit contains...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#13
|
|||
|
|||
Craig,
I sent partial Micron plans in ( no decal scans ). Dasher decals are posted someplace, it was on the recent YORP updates list. not sure about plans themselves. I have the Pro-series Jayhawk , will see what I can do - this was recently discussed on the YORF, so maybe someone sent em in by now, lmk if still needed . 2150 Rattler 7, will look and see if I have the plans, I did scan the decals, but maybe they did nto get sent ? again , lmk ( I did send a bunch int hat were unusable due to scanner settings, so maybe those were amongst the bad ones ). ~ AL ( will see what else I have on the non-Estes items as well ) |
#14
|
||||
|
||||
I'm pretty sure the Collector's series 2063 Mars Snooper instructions were an exact reprint of the original instructions right down to the non-sensical A8-3 engine choice as one of the recc. motors. I built one of those MANY years ago but unfortunately do not know where the instructions/box went.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! Last edited by ghrocketman : 05-09-2006 at 02:16 PM. |
#15
|
||||
|
||||
Quote:
Good to know, GHR. That's one I can re-link temporarily.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#16
|
||||
|
||||
Quote:
Craig - Scott has the #2085 Jayhawk scan now.
__________________
John YORF #003 SAM #004 |
#17
|
||||
|
||||
Quote:
#2102 is the one I have, the 15th anniversary one. Now I'm not sure if I want to open the bag to scan it. Then I'd have to keep track of the parts, etc., which means I'd have to move it from the top of the pile of other rocket stuff on the dining room table.
__________________
John Thro, NAR #84553 SR I was too old when I started! Now I'll *never* become a BAR! Last edited by JRThro : 05-12-2006 at 10:19 AM. |
#18
|
||||
|
||||
Quote:
If you build it, then you'd know where all those parts are... And you'd only need to move it once in a while...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#19
|
||||
|
||||
Quote:
If I could get over my painting phobia, I might do just that.
__________________
John Thro, NAR #84553 SR I was too old when I started! Now I'll *never* become a BAR! |
#20
|
|||
|
|||
Is There Any Company That Actually Made The X-20 Dyna Soar?
|
Thread Tools | Search this Thread |
Display Modes | |
|
|