#1
|
||||
|
||||
The latest Roachwerks Creation!
I just finished this project for a customer.
The transition fits a 7.62" body tube with a 6.07" tube down the middle. The transition was made with 4" x 4" s glued together (four of them!) then hollowed out to fit a 6" PML tube The capsule which was made with 3" x 3" blocks and some 1" x 4" slabs glued on the outside, fits into the 6" tube. The worst part was hollowing out the transition for the 6" tube!
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#2
|
||||
|
||||
Quote:
Is this going to be a Mercury-Redstone, or Mercury-Atlas?
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
||||
|
||||
Quote:
Niether. It is going to be a Mercury Little Joe. It's high powered with a 38mm motor mount.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|