![]() |
|
#1
|
||||
|
||||
![]() Quote:
Please post your updated DATA files on this thread once they're ready for public consumption. ![]() Thanks and cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. ![]() ![]() --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#2
|
||||
|
||||
![]() Quote:
What's that well-worn phrase again? I'm workin' on it... ![]()
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
||||
|
||||
![]() I'm going to post these files in their last-known condition, meaning the data is the same as on the Studio thread from their last respective posts. In a few weeks, I am going to go through them again and finalize some descriptions that are not displaying as I'd like. The parts data, however, appears to be usable as-is.
For those who understand that CSV files are nothing more than "Comma Separated Values" spreadsheets, then you have the option of looking through your existing database files and culling out all of the old SEMROC data using Excel, Quattro, or Calc. If you don't want to go through all of that, then MOVE all of the CSV files already in your 'data' folder to some other folder, and place these files into the 'dataimport' folder. I am going to save them here with their final filenames, meaning you only need to save them in the 'dataimport' folder, then run RockSim.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#4
|
||||
|
||||
![]() Craig,
Will these files work with RS 8, or are they RS 9-only? (I don't know if there is any difference in the file formats.) Mark \\.
__________________
Mark S. Kulka NAR #86134 L1,_ASTRE #471_Adirondack Mountains, NY
Opinions Unfettered by Logic • Advice Unsullied by Erudition • Rocketry Without Pity
|
#5
|
||||
|
||||
![]() Quote:
I think these go back as far as V7, but I know they're the same as V8.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#6
|
|||
|
|||
![]() Craig, I didn't see the Semroc body tube master file that we worked on in your list so I've attached it to this post.
I followed your lead and uploaded file with final filename so it could just be saved in the Rocksim 'dataimport' folder. Again, this is the same as the latest body tube file posted in the Studio thread. I imported each of the 8 parts files posted and have been using them in my latest builds. So far they seem ok. ... Bill |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|