Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > The Doctor is In! > Ask the Doctor
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-01-2010, 03:01 PM
Rocket Doctor Rocket Doctor is offline
Master Modeler
 
Join Date: Jan 2007
Posts: 2,400
Default Reaction Motors Plaque Dedication

On October 9th, at 1 pm there will be a plaque dedication for the reaction Motors Pequannock/Pompton Plains site.

This is the site where the XLR-11 Bell X-1 motors were tested back in the early 40's.

The ceremony will be held on Rt23 & West parkway in Pompton Plains/Pequannock NJ

All of the reaction Motors sites are in the general area in northern NJ

Any questions, PM me.
Reply With Quote
  #2  
Old 10-02-2010, 08:41 PM
blackshire's Avatar
blackshire blackshire is offline
Master Modeler
 
Join Date: Jan 2009
Location: Fairbanks, Alaska
Posts: 6,507
Default

Thank you very much for posting this! There's no way I could make it there, but I'm just heartened that this pioneering company's work is being commemorated. Reaction Motors literally opened the door to the Space Age by demonstrating that liquid propellant rocket propulsion systems were sufficiently safe and reliable (the Ulmer leather seal issue notwithstanding) for piloted flight.

Their four-chambered LOX/WALC (Water/Alcohol) XLR-11 engines powered not only the X-1 series of rocket planes, but also the X-15 (using an "over-under" cluster of two XLR-11s) during its early test flights before its larger XLR-99 engine was ready. In addition, XLR-11 engines powered NASA's M2-F2 lifting body research aircraft (which was later rebuilt as the M2-F3 after its famous crash, whose footage appeared in the opening credits of "The Six Million Dollar Man"), the NASA HL-10 lifting body, and the USAF's X-24A lifting body, which was later extensively modified into the double-delta X-24B.

Through all of these projects, the Reaction Motors XLR-11 remained in service from the early post-World War II years through 1975. If memory serves, a derivative of the engine also furnished propulsion for Convair's MX-774, the superficially V-2-like test rocket that pioneered several technologies (integral pressure-rigidized "balloon" propellant tanks, a separable nose cone, gimballed thrust chambers, etc.) that were later utilized in Convair's Atlas ICBM.
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see:
http://www.lulu.com/content/paperba...an-form/8075185
http://www.lulu.com/product/cd/what...of-2%29/6122050
http://www.lulu.com/product/cd/what...of-2%29/6126511
All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com.
NAR #54895 SR
Reply With Quote
  #3  
Old 10-03-2010, 07:22 AM
Rocket Doctor Rocket Doctor is offline
Master Modeler
 
Join Date: Jan 2007
Posts: 2,400
Default

Reaction Motors local history.

Reaction Motors started out in a "bicycle" shop in Pompton Lakes NJ. If you wanted to buy a bicycle, you couldn't, it was a cover for what was going on in the back room, rocket engine building. The motors were test fired at Lake Inez in Pompton Lakes. Currently, there is a hrdware store located in the building, which is located on Wanaque Ave.

Then they moved to Franklin Lakes NJ, the location was 936 Dogwood Trail. At this location, RMI tested JATO engines (Jet Assisted Take Off) for the Navy . They were there from 1942 - 1944. A concrete block house remained at that location until about five years ago and then it was domolished.

The last time I visited that location, it was just a wooded area, but, I was lucky enough to speak with a neighbor who salvaged a concrete block and gave it to me.

From Franklin Lakes, RMI moved into a fromer silver company building in Pequannock NJ. Also know as the sand pit. Here, the XLR-11, Bell X-1 motors were developed and tested. They made so much noise that the neighbors got together to force RMI out of town.

This is the location od the marker/plaque dedication ceremony to be held on Saturday October 9, 2010 AT 1PM. Rt 23 and West parkway.

I will be in attendance for this dedication and will be taking photos.

After leaving Pequannock, RMI moved it's operation to 100 Ford Road in Denville NJ, this was the headquarters and manufacturing facility. The building still stands today.

Back in 2005, the AIAA dedicated two plaques to honor RMI and their contributions to the military and space efforts.

A side note, back in 1988 I worked for a company in that building. In our lunch room there was a small room in the corner that we called the rocket room, The walls were about 12 inches thick with a heavy door, we were told this is were they tested propellants.

At the same time, RMI had several test stands located in Picatinny Arsenal in Dover NJ, these test stand were located at the Navy depot and remain today.

I have visited one of the test stands, the one used for testing the XLR-11 engines. I will be going back again on Oct 14, 2010 to photograph this site and hopefully getting up to the XLR-99 X-15 motors test site on the top of the hill.

RMI just had their 18th bi-annual reunion of former employees in Mountain Lakes NJ. Over 125 former employees attended.

RMI had many firsts and produced thousdands of motors both small and large over their years in business. Thiokol had pruchases RMI and by 1972 it was just a memory.

A XLR-99 (X-15) engine is on display at the Teterboro Aviation Museum at the Teterboro Airport off RT 46 in NJ

There are other locations of hardware from RMI in other location as well.
Reply With Quote
  #4  
Old 10-15-2010, 02:02 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Nunya Bizznuss, Michigan
Posts: 13,443
Default

The "neighbors" should have had to SUCK IT UP AND DEEL WITH the rocket engine noise, PERIOD. Don't like it ? TOUGH FECES ! MOVE !
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL
, if you have to ask what is "NORMAL" , you probably aren't !

Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, and HAVOC !
Reply With Quote
  #5  
Old 10-15-2010, 02:06 PM
Leo's Avatar
Leo Leo is offline
German Model Rocket Builder
 
Join Date: Sep 2005
Location: Germany
Posts: 1,313
Default

__________________
Leo

My rocket fleet and more @ Leo's Leisure Site and on YouTube - My latest project: ALTDuino
Reply With Quote
  #6  
Old 10-15-2010, 02:32 PM
tfischer tfischer is offline
Craftsman
 
Join Date: Sep 2007
Location: Minneapolis, MN
Posts: 202
Default

Quote:
Originally Posted by ghrocketman
The "neighbors" should have had to SUCK IT UP AND DEEL WITH the rocket engine noise, PERIOD. Don't like it ? TOUGH FECES ! MOVE !


Really? So if I set up shop next to your house and make so much racket that it impedes on your usage/enjoyment of your own property, you'll just pack up and move?

It would be another thing altogether if the neighbors moved there, with full realization of what they were moving next to, and THEN complained...
Reply With Quote
  #7  
Old 10-15-2010, 03:35 PM
jdbectec jdbectec is offline
the middle-aged rocketeer
 
Join Date: Sep 2006
Location: Urbana, Illinois.....the birthplace of HAL
Posts: 468
Default

Quote:
Originally Posted by tfischer
Really? So if I set up shop next to your house and make so much racket that it impedes on your usage/enjoyment of your own property, you'll just pack up and move?

It would be another thing altogether if the neighbors moved there, with full realization of what they were moving next to, and THEN complained...



No offense to you guys, but can you take it outside?

Back on topic, I'm glad the plaque was put there, and thanks to the Rocket Docter, and LEO for sharing.
__________________
Jeffrey Deem
NAR16741
CIA section 527
Reply With Quote
  #8  
Old 10-15-2010, 05:14 PM
Rocket Doctor Rocket Doctor is offline
Master Modeler
 
Join Date: Jan 2007
Posts: 2,400
Default Reaction Motors Update

On Thursday Oct 14, 2010, the day that Charles "Cheuck" Yeager broke the sound barrier back in 1947, I made a trip over to Picatinny Arsenal in Dover NJ.

Here at the Navy Depot, Reaction Motors did testing on the XLR-11 (Bell X-1) motors and also the XLR-99 (X-15) motors.

I was escorted up to the "top of the hill" by Patrick Owens the Picatinny Historian and a member of public relations.

We went inside the test site building where the X-15 motors were tested, went inside the control room and the work shop/storage building.

I will send the pics to Leo and ask him to post them for me.

I also went ov to Marotta's and spoke with the owner Mr Tom Marotta and got additional information on Reaction Motors. (www.marotta.com)
I am working on an article for Sport Rocketry about the pictorial history of reaction Motors.

Last edited by Rocket Doctor : 10-15-2010 at 05:39 PM.
Reply With Quote
  #9  
Old 10-15-2010, 05:17 PM
tfischer tfischer is offline
Craftsman
 
Join Date: Sep 2007
Location: Minneapolis, MN
Posts: 202
Default

Back on topic, this is really cool, and thanks for the stories and the picture of the plaque.

Anyone know where I can get one of these that fits in my Mean Machine?
Reply With Quote
  #10  
Old 10-16-2010, 03:35 AM
Leo's Avatar
Leo Leo is offline
German Model Rocket Builder
 
Join Date: Sep 2005
Location: Germany
Posts: 1,313
Default

Reaction Motors in Pequannock NJ storyboard of history
Tests and production of the XLR-11 Bell X-1 motors were done here:


Reaction Motors test sie located in Franklin Lakes NJ. Address is 936 Dogwood trail, a cement block , block house stood here until five years ago and then knocked down. RMI use to test JATO motors here until 1944:


Ramp leading up to the X-15 test stand building:


Reaction Motors test stand for X-15 motors:


Reaction Motors test stand for the XLR-99 X-15 rocket motor. They fired the engines out the top (metal roll up door) located at Picatinny Asenal, Dover NJ:


Reaction Motors X-15 test stand control panel:


Reaction Motors XLR-11 Bell X-1 motor:


This is an XLR-99 X-15 Reaction Motors engine on display at the teterboro Air Museum at the Teterbor Airport in NJ.
This type of motor powered the X-15:
__________________
Leo

My rocket fleet and more @ Leo's Leisure Site and on YouTube - My latest project: ALTDuino
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 05:05 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024