#1
|
|||
|
|||
New Estes PSII E2X Model
It looks like Estes will be releasing another PSII E2X model called the Mammoth:
http://www.estesrockets.com/coming-...m-e2x-mammothtm It looks like a stretched Prowler with a different finishing scheme. I will have to get one when they become available.
__________________
Bob S.A.M. # 0014 |
#2
|
||||
|
||||
And, there's an E2X with a 24mm motor mount in that same list: http://www.estesrockets.com/coming-...-show-stoppertm
__________________
Bernard Cawley NAR 89040 L1 - Life Member SAM 0061 AMA 42160 KG7AIE |
#3
|
||||
|
||||
Quote:
2" in diameter. The nose cone looks like it's not quite long enough for a Black Brant II or III kitbash. I hope it is, though. I know I've retired my FSI Black Brant II to hangar queen duty and I'm sure others have also.
__________________
I love sanding. |
#4
|
||||
|
||||
Longer = heavier.
I would not recommend the "-8" delay times for flying that single stage. And I would strongly advise not launching in ANY breeze whatsoever with the booster.
__________________
-Fred Shecter NAR 20117 (L2) Southern California Rocket Association, NAR Section 430 |
#5
|
||||
|
||||
Quote:
I really wish Estes will follow the E16 and F15 with slightly core burning versions, especially of the booster motors. Or AeroTech comes out with a version of an APCP motor which can light a BP upper stage. Bill
__________________
It is well past time to Drill, Baby, Drill! If your June, July, August and September was like this, you might just hate summer too... Please unload your question before you ask it unless you have a concealed harry permit. : countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ; Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding... |
Thread Tools | Search this Thread |
Display Modes | |
|
|