#1
|
||||
|
||||
Estes Panavia
Another Pro Series II builder's kit:
http://www.estesrockets.com/new/009...-iitm-panaviatm Like the Scion and Sahara, this is a web exclusive. Is it Argent fins on a 2.5" x 40" body + nose? Hard to tell from the pictures.
__________________
Rich Holmes Camillus, NY Secretary / newsletter editor Syracuse Rocket Club http://richsrockets.wordpress.com |
#2
|
|||
|
|||
I'm thinking it looks a little familiar.
__________________
Charles McGonegal Ciderwright AEppelTreow Winery & Distillery Ad Astra Tabernamque! |
#3
|
|||
|
|||
Quote:
Based on the picture of the parts, I'd guess that it's the lower half of an Argent with a 2.5" nose cone on top. Quote:
Is that one stretched at all, or does it use just the Argent tubes? I've been planning to kitbash one of those out of an Argent and Ventris, but was going to add the Ventris payload section to lengthen it a bit.
__________________
John Buscaglia NAR 27366 SAM 63 CMASS Member |
#4
|
||||
|
||||
Argent has a 2.5 to 2 inch transition for the upper section. This looks like Argent fins on 2/3 of a Partizon. Actually I might need one of these for a particular project.
__________________
Bernard Cawley NAR 89040 L1 - Life Member SAM 0061 AMA 42160 KG7AIE |
#5
|
||||
|
||||
Quote:
Just a tad! What's the length of your bash?
__________________
Rich Holmes Camillus, NY Secretary / newsletter editor Syracuse Rocket Club http://richsrockets.wordpress.com |
#6
|
|||
|
|||
Off hand, I don't recall. Two thirds of a Partizon worked out to within fractions of an inch of a proper upscale.
The Argent fins are only kinda Cherokee-ish, but Gordy was able to deliver a tweaked set.
__________________
Charles McGonegal Ciderwright AEppelTreow Winery & Distillery Ad Astra Tabernamque! |
Thread Tools | Search this Thread |
Display Modes | |
|
|