Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > The Golden Age of Model Rocketry > Model Rocket History
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-21-2016, 07:07 PM
chrism chrism is offline
Master Modeler
 
Join Date: May 2008
Location: Greenville, PA
Posts: 1,291
Default Does Anyone Remember MPC Lunar Launch Pads?

There is this hobby shop here in the Twin Cities that specializes in OOP models and other neat stuff. Hanging on the wall in their rocketry area are I think 4 MPC Lunar Launch pads. The packaging looks old, I could not see a date on them. Anyway they are silver and remind me a lot of the Estes Porta Pad in design, except they have a red fiberglass launch rod. They are the pad only and do not include a launch controller.

Back when I was growing up in western PA, the hobby shops there carried only Estes and Centuri products. It wasn't until years later that I found out MPC made more than just car models.
Reply With Quote
  #2  
Old 04-21-2016, 07:33 PM
Initiator001 Initiator001 is offline
Too Many Initiators is Never Enough
 
Join Date: Mar 2005
Location: San Diego, CA
Posts: 2,394
Default

Quote:
Originally Posted by chrism
There is this hobby shop here in the Twin Cities that specializes in OOP models and other neat stuff. Hanging on the wall in their rocketry area are I think 4 MPC Lunar Launch pads. The packaging looks old, I could not see a date on them. Anyway they are silver and remind me a lot of the Estes Porta Pad in design, except they have a red fiberglass launch rod. They are the pad only and do not include a launch controller.

Back when I was growing up in western PA, the hobby shops there carried only Estes and Centuri products. It wasn't until years later that I found out MPC made more than just car models.


These are actually MRC launch pads from the mid/late 1980s.

The big clue is the fiberglass launch rod.
__________________
Bob
S.A.M. # 0014
Reply With Quote
  #3  
Old 04-21-2016, 10:43 PM
stefanj stefanj is offline
Master Modeler
 
Join Date: Mar 2005
Location: Hillsboro, OR
Posts: 2,847
Default

I have a couple of those pads, bought in MPC packaging back in the day from AVI.

I never had the "Lunar Lectric" controller. Missed out on the chance to buy them from AVI.
__________________
NAR #27085 - Oregon Rocketry - SAM
Reply With Quote
  #4  
Old 04-21-2016, 10:54 PM
georgegassaway's Avatar
georgegassaway georgegassaway is offline
Contest, Sport, it's all good......
 
Join Date: Jul 2008
Location: West of Minneapolis, MN
Posts: 760
Default

I used the original MPC pad a LOT. Also had a Cox pad, but used the MPC pad more.

The box said it was a "Flying Model Rocket Launch Pad". So..... I converted the pad to FLY, and flew it on D12 power.

OK, so there was a plan in MRM on how to do just that.

__________________
Contest flying, Sport flying, it's all good.....
NAR# 18723 NAR.org
GeorgesRockets.com
Georges'CancerGoFundMe:
https://www.gofundme.com/f/help-geo...ay-fight-cancer

Last edited by georgegassaway : 04-22-2016 at 10:25 PM.
Reply With Quote
  #5  
Old 04-22-2016, 06:09 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Nunya Bizznuss, Michigan
Posts: 13,443
Default

WOW !
Now that's something I'd really like to see !
Do you have any pics of the pad actually flying under rocket-power ?
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL
, if you have to ask what is "NORMAL" , you probably aren't !

Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, and HAVOC !
Reply With Quote
  #6  
Old 04-22-2016, 06:58 PM
Scott_650 Scott_650 is offline
Master Modeler
 
Join Date: Sep 2015
Posts: 624
Default

Aahh - my original launch pad from long ago. Gave it away with almost all my rocket stuff sometime in the late 70s. If I recall correctly the windvane didn't work very well - I think I left it off most of the time.
Reply With Quote
  #7  
Old 04-22-2016, 10:33 PM
georgegassaway's Avatar
georgegassaway georgegassaway is offline
Contest, Sport, it's all good......
 
Join Date: Jul 2008
Location: West of Minneapolis, MN
Posts: 760
Default

Quote:
Originally Posted by ghrocketman
WOW !
Now that's something I'd really like to see !
Do you have any pics of the pad actually flying under rocket-power ?


I have very few photos of anything from the 70's.

However, it is actually in my first Prang Film, which is on the Old Rocketeers Reunion DVD. There is a sequence where the music "Fanfare for the Common Man", by E.L.P. begins, a rocket takes off from the MPC pad...... and then the MPC Pad takes off.

I could try to get some screenshots but the images would be poor. Also I shot it zoomed back a bit too much, I later wished i'd shot a zoomed in pre-launch "establishing scene" to make it more obvious what was going on.
__________________
Contest flying, Sport flying, it's all good.....
NAR# 18723 NAR.org
GeorgesRockets.com
Georges'CancerGoFundMe:
https://www.gofundme.com/f/help-geo...ay-fight-cancer
Reply With Quote
  #8  
Old 09-22-2016, 01:36 PM
stefanj stefanj is offline
Master Modeler
 
Join Date: Mar 2005
Location: Hillsboro, OR
Posts: 2,847
Default

I lent one of my Lunar Lectric pads to the Sunriver Science Center's display of old rocketry stuff.

Both of the pads are missing the little wind vane that sits on top of the tilt-adjustment spike.

Someone suggested that the pad's pieces may have been scanned and exist in 3D modeling form. I looked on Shapeways but couldn't find anything. Is there another site where I might find these models?

Also interested in a re-creation of the MPC launch controller.

I could have sworn seeing a discussion about this on YORF, but can't find it now.
__________________
NAR #27085 - Oregon Rocketry - SAM
Reply With Quote
  #9  
Old 09-22-2016, 04:57 PM
mojo1986's Avatar
mojo1986 mojo1986 is offline
Old Canuck Modeller
 
Join Date: Mar 2005
Location: Kingston, CANADA
Posts: 2,160
Default

Can anyone post a photo of the pad under discussion? There were a few model rocket companies that had such a launch pad back in the day, and I'm wondering if the moulds made the rounds when some of these companies went out of business. I believe the Canadian company (Canaroc) sold one like the pad mentioned here, complete with the little wind vane. I'm sure they never produced the pads themselves but rather found a source for them.

Speaking of the MPC version and the Lunar Lectric controller from the same company, these products show up from time to time on Ebay.

Joe
Reply With Quote
  #10  
Old 09-22-2016, 05:11 PM
hcmbanjo's Avatar
hcmbanjo hcmbanjo is offline
When Pigs Fly!
 
Join Date: Sep 2005
Location: Orlando, FL
Posts: 1,102
Default

Quote:
Originally Posted by mojo1986
Can anyone post a photo of the pad under discussion?Joe


There's an MRC Concept II Launcher on Ebay as we speak:

http://www.ebay.com/itm/Factory-Sea...AAOSwFe5X12z M
Attached Thumbnails
Click image for larger version

Name:  MRC Concept II Launcher.jpg
Views: 92
Size:  82.4 KB  
__________________
Hans "Chris" Michielssen
Old/New NAR # 19086 SR

www.oddlrockets.com
www.modelrocketbuilding.blogspot.com
http://www.nar.org/educational-reso...ing-techniques/
Your results may vary
"Nose cones roll, be careful with that."
Every spaceman needs a ray gun.
Look out - I'm the Meister Shyster!
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 05:43 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024