![]() |
#1
|
||||
|
||||
![]() Quote:
Please post your updated DATA files on this thread once they're ready for public consumption. ![]() Thanks and cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. ![]() ![]() --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#2
|
||||
|
||||
![]() Quote:
What's that well-worn phrase again? I'm workin' on it... ![]()
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
||||
|
||||
![]() I'm going to post these files in their last-known condition, meaning the data is the same as on the Studio thread from their last respective posts. In a few weeks, I am going to go through them again and finalize some descriptions that are not displaying as I'd like. The parts data, however, appears to be usable as-is.
For those who understand that CSV files are nothing more than "Comma Separated Values" spreadsheets, then you have the option of looking through your existing database files and culling out all of the old SEMROC data using Excel, Quattro, or Calc. If you don't want to go through all of that, then MOVE all of the CSV files already in your 'data' folder to some other folder, and place these files into the 'dataimport' folder. I am going to save them here with their final filenames, meaning you only need to save them in the 'dataimport' folder, then run RockSim.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#4
|
||||
|
||||
![]() Craig,
Will these files work with RS 8, or are they RS 9-only? (I don't know if there is any difference in the file formats.) Mark \\.
__________________
Mark S. Kulka NAR #86134 L1,_ASTRE #471_Adirondack Mountains, NY
Opinions Unfettered by Logic • Advice Unsullied by Erudition • Rocketry Without Pity
|
#5
|
||||
|
||||
![]() Quote:
I think these go back as far as V7, but I know they're the same as V8.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#6
|
|||
|
|||
![]() Craig, I didn't see the Semroc body tube master file that we worked on in your list so I've attached it to this post.
I followed your lead and uploaded file with final filename so it could just be saved in the Rocksim 'dataimport' folder. Again, this is the same as the latest body tube file posted in the Studio thread. I imported each of the 8 parts files posted and have been using them in my latest builds. So far they seem ok. ... Bill |
#7
|
||||
|
||||
![]() Quote:
Thanks, Bill. I totally missed that one. I thought they were all together in that list... ![]() Everyone, go ahead and start using these files. Whenever new components are released, they'll have to be updated anyway.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#8
|
|||
|
|||
![]() Here are the Rocksim part files for Semroc parachutes and streamers. It includes every parachute and streamer I could find listed on the Semroc web site. If you see anything missing let me know and I'll get it added in.
Since this is first time these parts files are being posted, they should get the once over before importing. They are fairly small files due to the limited number of parts in these categories. I think we are now down to just the mass objects parts to complete the Semroc master set. ![]() ... Bill |
#9
|
||||
|
||||
![]() Quote:
I would like to see some additional items in the MODATA file, if we can locate the weights. It would be nice to have some accurate data on snap swivels, Kevlar threads, and elastic chords. Either as individual parts, or as pre-assembled combos (ie - 24" of Kevlar thread, plus 24" of 1/8" elastic, plus a #10 or #12 snap swivel). Anyone know where we can get such data? Thanks, Bill, for working up streamers and parachutes!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#10
|
||||
|
||||
![]() R these files to be used to replace the existing data files in Rocksim? Or are these to be "merged, imported, added" into the already data files?
I copied the original ones on a separate folder as a backup. Downloaded the new ones and placed them on a "new data" folder. Ran RS v8 and "imported" the new files into the data folder. All I can select now on parts are from SEMROC. Did I do this right? What about all the old data in the older data files?
__________________
_____________________ - Raúl NAR #88644 SAM #230 EAC CAT _____________________ |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|