#1
|
|||
|
|||
Thrustline Aerospace A-SLAM Plans
The link below will take you to the plans for the A-SLAM kit.
Each plan set also includes a RockSim file for the kit. That's a good thing since nowhere could I find a parts list of tubing type, length, etc. I'd appreciate it if someone with RockSim or OpenRocket will give me a hand by adding a reply to this post listing the parts type/size you extract from the RockSim file. If you could include the templates from the RockSim file I'd appreciate that as well. http://www.oldrocketplans.com/tla/TLA_A-SLAM.zip These Thrustline Aerospace plans are for PERSONAL USE ONLY! John Rowan-Stern and Thrustline Aerospace reserves all commercial use rights.
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 Last edited by Ltvscout : 02-16-2019 at 12:55 PM. |
#2
|
||||
|
||||
Scott,
Is this what you are looking for? TLA A-SLAM Parts Nose cone Estes - Estes - BNC-70AJ, Material: balsa Nose shape: Hollow Parabolic, Len: 4.4000 In., Dia: 2.2170 In. Wall thickness: 0.1250 In. Body insert: OD: 2.0920 In., Len: 0.7500 In. Screw Eye - Custom Mass: 0.1000 Oz. Mass object - Custom Mass: 0.7000 Oz. Body tube Estes - Estes - BT-70, Material: Paper OD: 2.2170 In. , ID: 2.1800 In. , Len: 17.0000 In. Forward Fin set - 4 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees Point List in mm : 173.994064664618 , 0. 178.879782088975, 19.3504870588955 63.5343663748161, 19.1380645621843 0., 0. Custom Fin set - 4 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees Point List in mm : 77.5819708016097, 0. 70.4810164384136, 39.2157286388845 27.4143739061612, 39.2157286388845 6.82003624381552, 20.1978737528717 0., 0. Parachute - Custom, Material: 1.3 oz. Ripstop Nylon (SkyAngle) 1 parachute, Shape: 6 sided Dia: 20.0000 In., Spill hole: 0.0000 In. Launch lug Apogee - "1/8"" X 1" - , Material: Paper OD: 0.1720 In., ID: 0.1560 In., Len: 1.0000 In., Loc: 7.6250 In. Launch lug Apogee - "1/8"" X 1" - , Material: Paper OD: 0.1720 In., ID: 0.1560 In., Len: 1.0000 In., Loc: 12.5000 In. Body tube 1 Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In. , ID: 0.7100 In. , Len: 2.7500 In. Location: 14.2500 In. From the front of Body tube Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube 1 Engine hook Estes - Engine hook - Standard size Body tube 2 Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In. , ID: 0.7100 In. , Len: 2.7500 In. Location: 14.2500 In. From the front of Body tube Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube 2 Engine hook Estes - Engine hook - Standard size Body tube 3 Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In. , ID: 0.7100 In. , Len: 2.7500 In. Location: 14.2500 In. From the front of Body tube Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube 3 Engine hook Estes - Engine hook - Standard size Ring - Custom, Material: Aircraft plywood (Birch) Centering ringOD: 2.1800 In., ID: 0.9449 In., Len: 0.1250 In. Location: 14.3750 In. From the front of Body tube Ring - Custom, Material: Aircraft plywood (Birch) Centering ringOD: 2.1800 In., ID: 0.9449 In., Len: 0.1250 In. Location: 16.5000 In. From the front of Body tube Mass object - Custom, Material: 1/4 In. flat elastic
__________________
Bruce S. Levison, NAR #69055 Last edited by teflonrocketry1 : 02-19-2019 at 08:00 PM. |
#3
|
|||
|
|||
Quote:
Yes. Thanks, Bruce!
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
Thread Tools | Search this Thread |
Display Modes | |
|
|