#1
|
|||
|
|||
return of the "glory days"?
for the past few years, the big dogs (estes, quest, etc) have had either too gimicky (pop-fly)
or just your basic 3fnc, nothing really like the stuff from the 80's, early 90's, and ceartainly even the basic 3fnc now are less than the most basic ones offered in the 70's. but lately, especialy with estes, I've noticed an overall improvement in not just the quality of the kits, but an improvement in the idea as well. bringing back some of the classics, as well as some new ones which i see as future classics, such as the epm-010 i was working on this morning. a couple years ago, the "level 2" kits had plastic fin cans, peel and stick decals, and pre colored parts. now, most level 1 kits have water slide decals. there are even some composite motors and higher skill level kits on the que for release. I'm stoked about how the kit quality is turning out lately, how about all of you?
__________________
you know those cop shows where they talk about a town and say "Theres alot of known gun owners in this town", why do they act like its a bad thing? Long live the Mars Snooper! |
#2
|
||||
|
||||
The tastes of consumers have changed and Estes is conforming to sales trends. Accept that. The main thing that has happened is a strong polarization of rocketry to a model where HPR and thus LMR is linked to clubs by hard regulations that kill growth hard. The Consumer level has no such self-imposed throttling or regulations and folks are free to purchase low end model rockets nationwide and in many other countries with no permits or hassles.
Guess who helps write those regulations? Estes and Quest. Jerry |
#3
|
|||
|
|||
i was speaking more of the kit quality, rather than regulations and red tape.
__________________
you know those cop shows where they talk about a town and say "Theres alot of known gun owners in this town", why do they act like its a bad thing? Long live the Mars Snooper! |
#4
|
||||
|
||||
Hey I thought these are the glory days!
Now I have money to buys stuff and a lot more different stuff to go around.
__________________
Patriot 464 CMASS MMMSClub.org NAR #92766 |
#5
|
||||
|
||||
I too like what I see, and for the first time in practically decades, I am actually buying new Estes kits, rather than mostly scratch-building (or buying old classics on eBay).
I like the return of balsa nose cones, although I do wonder what is going on with the Super Alpha, having a plastic nose cone, while the package says it has a balsa one? Overall, I think Estes is doing a lot more exciting things than most of us could have ever imagined. I still continue to add to my collection of Semroc kits, but it is really good to have Estes back in the game again.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#6
|
||||
|
||||
Quote:
My understanding is that, mostly due to the high price of balsa, Estes is going back to plastic nose cones whenever they can. Personally, I like the plastic nose cones - they are easy to finish and they stand up to punishment better than balsa. Far as I'm concerned - it's all good! |
#7
|
||||
|
||||
Quote:
I can respect that. Human joints do wear out!
__________________
Patriot 464 CMASS MMMSClub.org NAR #92766 |
#8
|
|||
|
|||
I like balsa for some "nostalgic" kits, but plastic is hands down easier to finish. no sealer, and with fins, you can fake no sealer, but for a nose cone, not so much. but i still like to use balsa tube adapters, as they seem to hold up better.
__________________
you know those cop shows where they talk about a town and say "Theres alot of known gun owners in this town", why do they act like its a bad thing? Long live the Mars Snooper! |
#9
|
||||
|
||||
Quote:
Argh - don't remind me - my left shoulder is gone and I'm gonna have to have a joint replacement later this fall - and I'm only 54!!! |
#10
|
||||
|
||||
Quote:
Some plastic cones are easier to finish. Some, with a bad mold seam, are a pain. Balsa cones can be sanded to a different shape; there is less flexibility with plastic ones. So my answer is "it depends." Bill
__________________
It is well past time to Drill, Baby, Drill! If your June, July, August and September was like this, you might just hate summer too... Please unload your question before you ask it unless you have a concealed harry permit. : countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ; Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding... |
Thread Tools | Search this Thread |
Display Modes | |
|
|