Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > RockSim Asylum
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 01-22-2009, 12:08 AM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default

Quote:
Originally Posted by rosko_racer
R these files to be used to replace the existing data files in Rocksim? Or are these to be "merged, imported, added" into the already data files?

I copied the original ones on a separate folder as a backup. Downloaded the new ones and placed them on a "new data" folder. Ran RS v8 and "imported" the new files into the data folder. All I can select now on parts are from SEMROC. Did I do this right? What about all the old data in the older data files?


As long as you have saved the old files in another folder, the data is still available. It's just not being accessed by RockSim. Make yet another copy of the old files, and put them somewhere else (another folder) as a backup. If you are comfortable working with spreadsheet CSV files, open each CSV and edit out (delete) any SEMROC data lines that came with it from Apogee. Save this file in the "new data" folder (RS8) or "dataimport" folder (RS9), using the base filename (ie - BTDATA.CSV), making sure the file format does not change. Some programs, like OpenOffice Calc, like to surround each cell with quotation marks as a default for CSV data, so make sure your spreadsheet does not. When you finish doing this for all of the affected CSV files, run RockSim and let it import the remaining original data back into its "working copy" of the database.

Some of us do prefer to use just the SEMROC data, since we only build LPR designs, so all of the other data is not required. We might also keep the BMS data on hand, since we like Bill's balsa work (and other goodies) as well.

If you're not comfortable working with database spreadsheets, then you can still just re-import the old files and deal with the many duplications of SEMROC components you'll wind up with.
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #12  
Old 01-22-2009, 12:17 AM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default Speaking of BMS data...

We need to work up some BMS component files as well, since Bill has some additional goodies we can always use. I ordered some of his plywood rings once, and really liked them. They were lightweight, but felt better than similar pressed-paper rings.
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #13  
Old 01-25-2009, 11:57 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default Update to TRDATA.CSV

It looks like the TRDATA file that was posted here was an early copy, and not the one that should have been. The attached file has a TON more parts included.
Attached Files
File Type: csv TRDATA.CSV (64.3 KB, 156 views)
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #14  
Old 02-12-2009, 11:07 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default Complete List of Database Files -- 02-12-2009

I should have returned to this thread sooner. AFAIK, this represents the last complete list of the RockSim database files using SEMROC components. One or two of these files had some errors at one point, and I am not saying these contain the corrections. Since a new build (9.0.2 F72) has just been released, take this time to reload your database files from this post, and start using the components. If you spot an error, shout.
Attached Files
File Type: csv TRDATA.CSV (64.3 KB, 175 views)
File Type: csv TCDATA.CSV (1.9 KB, 185 views)
File Type: csv STDATA.CSV (578 Bytes, 165 views)
File Type: csv PCDATA.CSV (1.2 KB, 176 views)
File Type: csv NCDATA.CSV (27.4 KB, 185 views)
File Type: csv LLDATA.CSV (1.4 KB, 156 views)
File Type: csv EBDATA.CSV (998 Bytes, 172 views)
File Type: csv CRDATA.CSV (5.7 KB, 176 views)
File Type: csv BTDATA.CSV (26.1 KB, 170 views)
File Type: csv BHDATA.CSV (3.5 KB, 179 views)
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #15  
Old 02-28-2009, 01:06 AM
rkt2k1 rkt2k1 is offline
Just another BAR!
 
Join Date: Mar 2005
Posts: 131
Post New Semroc (MRI) Cones - Rocksim Parts

Quote:
Originally Posted by Carl@Semroc
We have quietly released all the MRI/MPC balsa cones. We do not have tubes yet. They are
BC-T2032 MRI #620A
BC-T2014 MRI #620B
BC-T2032C MRI #620C
BC-T2534 MRI #625A
BC-T3033 MRI #630A

I believe the BC-T2534 is the one for the Zenith II. The tube is 25mm (.984"). The ID is .945". It is CLOSE to a BT-50, but not exactly.


I found this note from Carl on another thread regarding some new cones he has added to the Semroc lineup. I worked up a Rocksim parts file for 4 of the 5 listed cones. It does not include T2032C. While Rocksim will work up a conical cone, the picture on the Semroc web-site indicates this is a rounded-tip cone.

You'll need to rename the attached file to NCDATA.CSV and place in the \Rocksim\DataImport directory to import new cones.

... Bill
Attached Files
File Type: csv NCDATA_Semroc_MRI_Cones.csv (578 Bytes, 132 views)
Reply With Quote
  #16  
Old 02-28-2009, 07:40 AM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default

Quote:
Originally Posted by rkt2k1
I found this note from Carl on another thread regarding some new cones he has added to the Semroc lineup. I worked up a Rocksim parts file for 4 of the 5 listed cones. It does not include T2032C. While Rocksim will work up a conical cone, the picture on the Semroc web-site indicates this is a rounded-tip cone.

You'll need to rename the attached file to NCDATA.CSV and place in the \Rocksim\DataImport directory to import new cones.

... Bill


The file imports fine. Thanks, Bill!
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #17  
Old 02-28-2009, 05:22 PM
Pem Tech's Avatar
Pem Tech Pem Tech is offline
Retromaniac
 
Join Date: Oct 2008
Posts: 298
Default

Thanks for posting these, we are grateful for the information.
__________________
Layne Pemberton NAR# 83083
Mad Scientist, Minion and Owner
PembertonTechnologies.com
P.O. Box 250760
North Little Rock AR, 72225

L1 on Pem-Tech Space Ark
at NSL2007

pem_tech (at) Yahoo (dot) com
TRF (at) pembertontechnologies (dot) com
Reply With Quote
  #18  
Old 04-10-2009, 10:23 PM
rkt2k1 rkt2k1 is offline
Just another BAR!
 
Join Date: Mar 2005
Posts: 131
Default New Semroc Parts (3 Cones and 1 Transition)

Quote:
Originally Posted by Carl@Semroc
I finally released the correct nose cones:

BC-1338B 57% downscale of Centuri BC-225B (BC-22567) and
BR-1013B 57% downscale of Centuri BR-175-225 for the Hustler un-SLS.

BC-1038B 57% downscale of Centuri BC-157B (BC-17567) for the Aero-Dart un-SLS

BC-731B 57% downscale of Centuri BC-125B (BC-12555) for the Scorpion un-SLS

I built them up to see what they looked like. Smaller than I thought. They are in the same scale as the Sky Hook and Javelin before they were SLS-ed. I have the laser-cut fins if anyone needs them. I would post pics, but they look the same, only smaller.


I found this note from Carl on another recent thread regarding some new cones and a new transition he has added to the Semroc lineup. I worked up the new parts in Rocksim. I also added 2 cones from the Semroc website which I didn't find in the master file.

You'll need to rename the attached files to NCDATA.CSV and TRDATA.CSV respectively and place them in the \Rocksim\DataImport directory to import the new parts.

... Bill
Attached Files
File Type: csv NCDATA_Semroc_New_Cones.csv (837 Bytes, 134 views)
File Type: csv TRDATA_Semroc_New_ Balsa_Reducer.CSV (529 Bytes, 130 views)

Last edited by rkt2k1 : 04-11-2009 at 12:44 AM.
Reply With Quote
  #19  
Old 04-11-2009, 12:28 AM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default

Quote:
Originally Posted by rkt2k1
I found this note from Carl on another recent thread regarding some new cones and a new transition he has added to the Semroc lineup. I worked up the new parts in Rocksim. I also added 2 cones from the Semroc website which I didn't find in the master file.

You'll need to rename the attached files to NCDATA.CSV and TRDATA.CSV respectively and place them in the \Rocksim\DataImport directory to import the new parts.

... Bill


...And we can download these from...where, exactly?
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #20  
Old 04-11-2009, 12:46 AM
rkt2k1 rkt2k1 is offline
Just another BAR!
 
Join Date: Mar 2005
Posts: 131
Default

Opps! Sorry about that!

They are attached to my previous post now.

Not sure what happened last time.

Let me know how they look.

Thanks,

... Bill
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 06:22 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024