#1
|
||||
|
||||
New From 3D Rocketry--> CIRCULUS 3 <--
This 3in. dia. kit weighs in at 20 oz. and comes with:
11.25" Pre-Weighted Nose Cone 15" Fiber Body Tube 7.75" x 29mm Motor Tube (Kit is designed for 195mm long motors and shorter.) 3/16" Thick Plywood Fins, Centering Rings and Bulkhead .375" Fiber Nose Cone Bulkhead Stop 1/4" x 1/8" Basswood Fin Trim 1/4" Eyebolt W/Nuts and Washer 8.25" x 2.375" Fiber Tail Ring 3" x 1/4" Launch Lug Slot Cutting Template, Fin Alignment Template and Instruction Booklet. Predicted Altitudes up to 2200 Ft. |
#2
|
|||
|
|||
Nice! What do you pre weight the nose cone with?
__________________
NAR # 39505 SR L1 NAR Section #576 MASA Member |
#3
|
||||
|
||||
2.2 oz. of tightly packed news paper. Since the nose cone is sealed by the bulkhead the paper is protected from moisture.
|
#4
|
|||
|
|||
Cool, that's a new technique.
__________________
NAR # 39505 SR L1 NAR Section #576 MASA Member |
#5
|
|||
|
|||
Biill sent me an email indicating that my Circulus 3 is in the mail. Can't wait to get started on this cool kit.
And a refund on some of the shipping cost , how cool is that.
__________________
John NAR #91135 L1 SAM #0037 |
#6
|
||||
|
||||
|
#7
|
||||
|
||||
Nose cone.
|
#8
|
||||
|
||||
A Pic !!
|
#9
|
||||
|
||||
I have recently done a kit modification to the Circulus 3.
1) The body tube is 2" shorter to match the scale of the Circulus 2 and upcoming Circulus 4 kit. 2) On the Version 2 kit the motor mount is a bit shorter to give more room to the interior, but every thing else is the same. 3) Added 3/16" eyebolt set to V2 kit. |
Thread Tools | Search this Thread |
Display Modes | |
|
|