BIG ditto to that one!

Earl

__________________
Earl L. Cagle, Jr.
NAR# 29523
TRA# 962
SAM# 73
Owner/Producer
Point 39 Productions

Rocket-Brained Since 1970

NOBODY, and I mean even Estes and Centuri during the golden era, beats Semroc at quality or customer service. They are truly the gold standard that other companies should measure themselves against. Carl, Sheryl, and Bruce set the bar very high, and we are fortunate to benefit from it.

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't !
Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC !

__________________
Bill Eichelberger
NAR 79563

http://wallyum.blogspot.com/

I miss being SAM 0058

Build floor: Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle

In paint: Canaroc - Starfighter Scorpion Centuri - Mini Dactyl Estes - F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc - Cyber III

Ready to fly: Estes - Solar Sailer II Semroc - Earmark

Indeed. Any company at all.

Can't doubt the sincerity of that post.

__________________
Retro-grouch

Hear! Hear! Semroc has NO equal!

__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078

Placed Semroc order Thursday, December 19th.

Order shipped Friday, December 20th.

Order delivered by USPS Monday, December 23, 7:45 AM!

Wow! Semroc can even get the post office to deliver an order before lunchtime in my area!

__________________
Bob
S.A.M. # 0014

...and that was to San Diego? Not bad!

__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078

I'm adding on to this thread so as not to clutter up the forums with a new one.

I'm on to building my original Estes Saturn 1b again. I'm gluing the centering rings that go in front of the fuel tanks, on the stuffer tube, and in the forward parachute tube. The alighment is crucial because this determines if the shroud fits correctly.

The original instructions aren't clear enough for my tastes, and I'd like to look at the Semroc version to get a "second opinion."

I did a search on the Semroc page, but I can't find the PDF instructions for the Saturn 1b. Does anyone have a trick for locating the profile page for an out-of-production kit?

Thanks!

__________________
NAR #27085 - Oregon Rocketry - SAM

PM sent.

__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078