04-12-2017, 12:00 PM
|
|
Craftsman
|
|
Join Date: Mar 2016
Location: Montana
Posts: 157
|
|
Quote:
Originally Posted by scigs30
Dewalt, how did you like the sanding and filling qualities of the sealer?
|
I was real happy with the sanding and filling qualities along with the dry time. The rocket was the Black Widow clone with 1/16" fins. My system was holding the rocket with my left hand brushing one side of the fin, rotate next fin. By the time I got back to the starting fin the Brodak had completely dried to the touch. (Montana dry climate) So with doing the reverse side and the rotation plus the booster I was able to do the whole rocket in one setting with three applications. I used wet/dry 400 grit dry to sand the fins which worked very well. . After primer they are very smooth.
To sum it all up my CWF will be used only for deep repair work from now on. The fumes were not unbearable - I had my window open in my hobby room. Soon my spraybooth will be plumbed back in and I will use it to exhaust any offending fumes instead of the window method.
Last edited by Dewalt : 04-12-2017 at 12:45 PM.
|