#11
|
||||
|
||||
I have Jupiter C Capsule and BT80 Gemini Capsule and they are very smooth also. The detail is very good also on both capsules. You even have a built in chamber to add weight
I was in the middle of building both rockets from scratch (SA5 & SA7) and I know the fin can would be the a hard part to get right, taking several hours alone. Alex has made very thing very easy with up to 27 3d printed parts. The built in fuel tank holders was really neat to. Nice to see someone provide the Saturn 1s for us at that scale. I'm sure he would upscale on special order. I use to like the 1/70 scale Estes Saturn 1B size, but now, I'm happy with the 1/100 scale size. Goes with my 1/100 Saturn V. I'm also in the middle of building a 1/100 Saturn 1B with a online 3d printed fin can. I'll finish this one, but will add Boyce Saturn 1B to my line up when it comes out in May |
#12
|
||||
|
||||
Quote:
I just tried to count the number of plastic "threads" per millimeter again, using a close-up-view (2x magnification) monocular, and I still couldn't tell exactly how many "threads" span a millimeter. It looked like five or six. In any event, the surfaces of the Boyce Aerospace Hobbies 3D printed rockets aren't very rough, and don't require laborious amounts of sanding.
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR Last edited by blackshire : 04-03-2019 at 06:48 PM. |
#13
|
||||
|
||||
They aren't builder kits for no reason. Lol
Just think also, he can sale the Apollo capsule as a Estes Saturn V replacement or any other 1/100 Saturn 1 SA7, 1B, V and Little Joe II. For those that just want the fin can to build from or as a replacement for some reason, here it is. The transitions will be much stronger than paper to. As I mentioned in another post, the time savings with his 3d parts is unbelievable in comparsion to total scratch build project. On special order, these items could be even be up sized to 1/69, 1/70, 1/72 scale to build a even larger Saturn 1. I had ordered all the tubes to build these same rockets to include the Saturn 1B about two months ago. Now I'm going with his 3d parts to complete my planed SA5 & 7 instead of doing a total scratch build from the ground up. The only 3d part that I had was a Shapeway Saturn 1B fin can. I'm going to go ahead and finish that rocket as planed, but I will be getting his redesigned Saturn 1B in May for sure to build a 2nd one. |
#14
|
||||
|
||||
Hope everyone noticed the two boilerplate live pics. They are really looking good.
|
#15
|
||||
|
||||
Quote:
Can you give a place to go to see these pics? I have been to there site and couldn't find them. |
#16
|
|||
|
|||
|
#17
|
||||
|
||||
Thanks, Allen, I thought there was some new pics up on these kits. I have been drooling over the two pictures on the home page ever since they were announced. I'm a Saturn 1B style rocket guy. I'm going to be in heaven when I get my hands on these kits. I already have the 50, 70, 58 and BT-19 tubes just waiting to get the go on the 3D printed parts.
Can you tell how excited I am? |
#18
|
||||
|
||||
Quote:
Thanks for the feedback. They certainly sound reasonably smooth — especially compared to what I’m familiar with just a couple years ago, in terms of printing quality.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#19
|
||||
|
||||
Quote:
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR |
#20
|
||||
|
||||
Quote:
In L.B. Taylor's 1968 book "Liftoff," plans for the 1970s were discussed, and among these were two equal-performance launch vehicles for lofting interplanetary spacecraft (such as the Helios close-proximity solar probes) and planetary probes (the Viking Mars Orbiter-Lander vehicles, the multiple Grand Tour outer planet--and ultimately interstellar--probes, etc.), and: The two proposed launch vehicles were the Titan III-Centaur (Titan IIIE) and the Saturn IB-Centaur (a drawing of which, from David S.F. Portree's Spaceflight History website, is attached below). (Interestingly, the earliest Saturn I test vehicles--SA-1 to SA-4 [and possibly SA-5 as well] were Saturn I-Centaur vehicles, having a "live" S-I first stage, a dummy S-IV second stage [which was "live" on SA-5], and a dummy S-III Centaur third stage [which might--or might not--have been considered a dummy S-III stage on the SA-5 vehicle].) Also: While the Titan IIIE was known--even back in 1968--to be the cheaper of the two, the Saturn IB-Centaur would have had the advantage of keeping the Saturn IB assembly line open in the 1970s, making possible AAP (Apollo Applications Program) missions throughout the 1970s and beyond, if desired (the Saturn IB could have launched a "Wet Workshop," Skylab-type space station, as well as--with separate Saturn IBs, of course--station crews in Apollo CSM spacecraft). Plus: From the earliest days of the original Saturn I test flights, there were proposals to upgrade the first stage to be reusable (being recovered via a Rogallo para-glider, see: http://www.google.com/search?source...299.p6544WKIh-A ), to lower the launch costs of the vehicle. In those early days, a high flight rate was anticipated--that was one reason why no fewer than three Saturn I launch complexes (LC-34, LC-37A & LC-37B) were built. The Saturn series was also expected to be used for many years, making an upgrade such as the recoverable & reusable first stage (whose structural strength due to its clustered tankage--plus the relatively small performance reduction caused by adding recovery system mass to the first stage [it's about a 1:1 trade-off on the upper stage, by comparison]) a logical next step. In addition: The Saturn IB-Centaur had a larger payload fairing (21.7' outside diameter, as opposed to 14' for the Titan IIIE), which was the same type as was used for the Skylab-Saturn V vehicle (see: http://www.google.com/search?ei=nZO...i30.iB5qsArb3SU ). Had the Saturn IB-Centaur been adopted instead of the Titan IIIE, outer planet space probes such as the Grand Tour spacecraft (the two-spacecraft Voyager series was/is a pared-down Grand Tour project) could have used considerably larger parabolic "dish" antennas, enabling higher image and data rate transmissions from their target planets (as well as greater communications ranges after the probes escaped from the Solar System). As well: The proposed Saturn IB-Centaur launch vehicle is covered *here* (in the February 4, 2019 article on David S.F. Portree’s Spaceflight History website, see: http://www.oldrocketforum.com/showt...7540#post227540 ). If Boyce Aerospace Hobbies offered 1:100 and/or 1:125 scale Skylab payload fairings, modelers could--using their already-available Saturn IB models of those scale sizes--build Saturn IB-Centaur scale models (these should be "NAR-Kosher," for those who enjoy scale competition, under the Future-Fiction Scale category [encompassing scale models of proposed-but-never-built, cancelled, existing-but-still-unflown, and fictional vehicles]). They could also, using that same part, build models of the Skylab-Saturn V vehicle (and possibly also models of the SA-203 Saturn IB S-IVB LH2 tank pressure-test flight vehicle [see: http://www.drewexmachina.com/2016/0...apollo-mission/ ; its S-IVB blew apart during the pressure test in orbit], whose nose fairing looked like it may have been the same shape as the Skylab payload fairing).
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR Last edited by blackshire : 04-10-2019 at 02:19 AM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|