You did what I didn't do -- you checked your sources!

I should have looked at the Kit List first, which I didn't.

A good example of Estes getting two kits out of one design.

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

GNRocketman if you have the kit what are the sizes of the Landing Pads and Gussets. There is a sheet on JimZ on the size of the Landing Gear and I drew them up but the landing pads look to long and I know that 3/16” is wrong it has to be at least 5/8”. The Gussets are ½” at the base and ¼” at the top, with a height of 3/8”. Once I drew that up it looks to small I do not know can you help me.