PDA

View Full Version : Estes BNC-50BC Nose Cone 3D Model


Jack Hydrazine
11-29-2020, 03:32 PM
This is a 3D model of the Estes BNC-50BC nose cone. It is designed to fit Estes BT-50 airframe tubing.
There are five files you can download. There are two versions of the nose cone itself (with and without the shoulder) and the other is the end cap which has a 3mm hole in it to allow you to add a screw eye or eye bolt.

The second version is designed to look more like it has a ramjet intake.
Estes kits that use this nose cone:

Kit# 0816 Wolverine
Kit# 1285 Teros
Kit# 1311 Laser Torpedo

https://www.thingiverse.com/thing:4669696

Flash
11-30-2020, 08:39 AM
Very nicely done, thank you so much!

shockwaveriderz
11-30-2020, 09:14 AM
This is a 3D model of the Estes BNC-50BC nose cone. It is designed to fit Estes BT-50 airframe tubing.
There are five files you can download. There are two versions of the nose cone itself (with and without the shoulder) and the other is the end cap which has a 3mm hole in it to allow you to add a screw eye or eye bolt.

The second version is designed to look more like it has a ramjet intake.
Estes kits that use this nose cone:

Kit# 0816 Wolverine
Kit# 1285 Teros
Kit# 1311 Laser Torpedo

https://www.thingiverse.com/thing:4669696

Thanks Jack...

Somebody ought to take the time to create 3D models for ALL the Estes/Centuri/Semroc,etc Nose cones so in the future anybody with a 3D printer can print their own.

dlazarus6660
11-30-2020, 03:37 PM
I might be mistaken but there maybe one or two models that uses that NC.

I'll check.

I was right.

Estes Strike Fighter.

Estes Sea Dart.

Estes Wasp.

5x7
11-30-2020, 04:56 PM
I might be mistaken but there maybe one or two models that uses that NC.

I'll check.

I was right.

Estes Strike Fighter.

Estes Sea Dart.

Estes Wasp.

Similar, but larger, PNC-55D

dlazarus6660
12-01-2020, 05:17 PM
Similar, but larger, PNC-55D

Oops!

Your right!

My CRS is acting up! :o

Jack Hydrazine
12-02-2020, 08:28 AM
Thanks Jack...

Somebody ought to take the time to create 3D models for ALL the Estes/Centuri/Semroc,etc Nose cones so in the future anybody with a 3D printer can print their own.

That would take a while!