Jack Hydrazine
12-13-2020, 12:04 PM
This is a 3D model of the Estes PNC-60MS nose cone that is designed to fit Estes BT-60 airframe tubing.
There are six files to download. There are five of the nose cone itself and the other is the end cap which has a 3mm hole in it to allow you to add a screw eye or eye bolt.
The first nose cone is has 1.5mm thick walls and has a 32mm long shoulder.
The second has 1.5mm thick walls and a 19mm shoulder.
The third has 1.0mm thick walls and a 19mm shoulder. This nose cone was specifically designed for DynaSoar Rocketry's Orbital Transporter Mini RC Rocket glider kit. The nose cone should weigh between 10 and 12 grams. This design is about 11g using PLA.
You can find out more about this kit here. https://dynasoarrocketry.com/?page_id=7309
DynaSoar Rocketry Youtube channel: https://www.youtube.com/user/burkefj
The fourth and fifth nose cones are the cones only without the shoulders and have 1.0mm and 1.5mm thick walls.
Estes kits that use this nose cone:
Kit# 1223 Big Bertha
Kit# 1261 Baby Bertha
Kit# 1387 Max Streak
Kit# 1391 Mini Shuttle
Kit# 1948 Big Bertha (re-issue)
Kit# 2021 Rascal
Kit# 2119 36 D Squared
Kit# 2173 Menace
Kit# 2442 Mini Fat Boy
Kit# 7007 Big Bertha (boxed)
Note: This nose cone can be upscaled in your slicer to fit the Estes Super Big Bertha model rocket kit.
There are six files to download. There are five of the nose cone itself and the other is the end cap which has a 3mm hole in it to allow you to add a screw eye or eye bolt.
The first nose cone is has 1.5mm thick walls and has a 32mm long shoulder.
The second has 1.5mm thick walls and a 19mm shoulder.
The third has 1.0mm thick walls and a 19mm shoulder. This nose cone was specifically designed for DynaSoar Rocketry's Orbital Transporter Mini RC Rocket glider kit. The nose cone should weigh between 10 and 12 grams. This design is about 11g using PLA.
You can find out more about this kit here. https://dynasoarrocketry.com/?page_id=7309
DynaSoar Rocketry Youtube channel: https://www.youtube.com/user/burkefj
The fourth and fifth nose cones are the cones only without the shoulders and have 1.0mm and 1.5mm thick walls.
Estes kits that use this nose cone:
Kit# 1223 Big Bertha
Kit# 1261 Baby Bertha
Kit# 1387 Max Streak
Kit# 1391 Mini Shuttle
Kit# 1948 Big Bertha (re-issue)
Kit# 2021 Rascal
Kit# 2119 36 D Squared
Kit# 2173 Menace
Kit# 2442 Mini Fat Boy
Kit# 7007 Big Bertha (boxed)
Note: This nose cone can be upscaled in your slicer to fit the Estes Super Big Bertha model rocket kit.