PDA

View Full Version : New Design: Extreme Wing


James Pierson
06-07-2009, 10:52 PM
Here is a mid-powered vector wing design that preforms well on the motors selected. This is one to build and test fly to seem if the balsa-dowel extension will hold up or not? This design might look even better with a longer BT in the future. For now, I am sticking with the shorter fighter look vs the longer interceptor.

Enjoy and Thanks Again, JP.

James Pierson
NAR# 77907
.

CPMcGraw
06-08-2009, 12:20 AM
Here is a mid-powered vector wing design that preforms well on the motors selected. This is one to build and test fly to seem if the balsa-dowel extension will hold up or not? This design might look even better with a longer BT in the future. For now, I am sticking with the shorter fighter look vs the longer interceptor.

Enjoy and Thanks Again, JP.

James Pierson
NAR# 77907
.

One possibility for those dowels -- change them to CF tubing, same diameter. Tougher, about as light if not lighter (although using epoxy might balance out the lower weight), but far straighter than common wooden dowels.