PDA

View Full Version : What to build now?


JRThro
06-08-2006, 05:29 PM
I have:
- a 14" length of BT-80
- a Big Daddy body tube (about 9" long, with precut fin slots)
- a BT-80 sized tube coupler
- a pair of centering rings for a 3x 18 mm cluster
- a bunch of 18 mm motor tubes
- a bunch of motor hooks
- a bunch of motor blocks
- an 18" BT-60 tube
- a short rounded PNC-60 nose cone
- other random parts and pieces
- a 4" wide by about 24" long piece of 1/8" balsa

Any suggestions?

(crossposted to TRF, btw)

CPMcGraw
06-08-2006, 05:56 PM
I have:
- a 14" length of BT-80
- a Big Daddy body tube (about 9" long, with precut fin slots)
- a BT-80 sized tube coupler
- a pair of centering rings for a 3x 18 mm cluster
- a bunch of 18 mm motor tubes
- a bunch of motor hooks
- a bunch of motor blocks
- an 18" BT-60 tube
- a short rounded PNC-60 nose cone
- other random parts and pieces
- a 4" wide by about 24" long piece of 1/8" balsa

Any suggestions?

(crossposted to TRF, btw)

Ahem...

JRThro
06-09-2006, 08:37 AM
I have:
- a 14" length of BT-80
- a Big Daddy body tube (about 9" long, with precut fin slots)
- a BT-80 sized tube coupler
- a pair of centering rings for a 3x 18 mm cluster
- a bunch of 18 mm motor tubes
- a bunch of motor hooks
- a bunch of motor blocks
- an 18" BT-60 tube
- a short rounded PNC-60 nose cone
- other random parts and pieces
- a 4" wide by about 24" long piece of 1/8" balsa

Any suggestions?

(crossposted to TRF, btw)
Sheesh, I said Big Daddy but meant Fat Boy, which actually uses a BT-80 tube.