New Design -- Exo-1
 

This one should be a challenge to build. Flying it should prove to be satisfying, with its very low Dv numbers, even if the altitudes aren't spectacular.

Length: 29.20"
Diameter: 1.04" (ST-10)
Fin Span: 6.08"
Weight: 2.03 oz


B4-4......353'......Dv 7 FPS
B6-4......365'......Dv 4 FPS


The A8-3 is not recommended at all, due to Dv numbers of 20 FPS or higher, and a requirement of a 48" rod. The C6-5 flies off a 36" rod, but also produces Dv's above 20 FPS. I am only recommending the B4-4 and B6-4 for this design.

I'll post fin sheets later.

Enjoy!

Fin Sheets
 

Here are the burn and print patterns. You will need two 1/8" thick main fin sheets, and one 3/32" thick outer fin sheet. The transition sheet is to be printed on cardstock.