Ye Olde Rocket Forum
Page 2 of 2 < 1 2
Show 40 posts from this thread on one page

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   Plans & Publications (http://www.oldrocketforum.com/forumdisplay.php?f=4)
-   -   Scans of 2155 Super Nova Payloader? (http://www.oldrocketforum.com/showthread.php?t=18105)

5x7 10-09-2019 05:42 AM
The Liquidator was nice because you could easily mod the D mount for E9s and load up the payload to fly in small fields. Jello was a favorite with my kids.

Ltvscout 10-09-2019 08:16 AM
Quote:
Originally Posted by BEC
Based on that picture, I'd agree...many of the same parts, different color.

Scott, I'll scan that fin then before I glue the parts together. You already have a good-looking scan of the decals (well, stickers, really) though it doesn't have a ruler in it. The sheet is almost a full 8 1/2 x 11 so I expect it will print the right size. But I can scan that, too while I'm at it. Do you want me to just post the scans here, or will you want to put them with the rest of the info?

Unfortunately, I can't update the old YORP site anymore which is why it has been stagnant so many years. Go ahead and post them to this thread. If when you go to post you find they're too big (over 2mb in size), email them to me and I'll get them posted here.

Thank you!

BEC 10-09-2019 01:00 PM
Quote:
Originally Posted by Ltvscout
Unfortunately, I can't update the old YORP site anymore which is why it has been stagnant so many years. Go ahead and post them to this thread. If when you go to post you find they're too big (over 2mb in size), email them to me and I'll get them posted here.

Thank you!


Gotcha.

Quote:
Originally Posted by 5x7
The Liquidator was nice because you could easily mod the D mount for E9s and load up the payload to fly in small fields. Jello was a favorite with my kids.


This Super Nova Payloader and the Blue Ninja and the Firebolt all use the same two inch long "engine block". Easy conversion to an E-capable mount, just use half of it. I glued up the motor mount assembly for the SNP last night and did it that way.

It also has a 12 inch long (!!) PST-55 payload tube. Talk about room to load stuff up.

BEC 10-14-2019 11:10 PM
Fin and "decals"
 
2 Attachment(s)
Here are the scans, finally.

The fins will be attached shortly after I post this, so hopefully this scan will do.


All times are GMT -5. The time now is 10:44 PM.
Page 2 of 2 < 1 2
Show 40 posts from this thread on one page

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.