View Single Post
  #2  
Old 06-19-2016, 03:26 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Nunya Bizznuss, Michigan
Posts: 13,443
Default

Scigs-
I sent you a PM reply.

Sig needs to be cut 1 part thinner for 2 parts sealer then it is usable; if you have a can of Sig, pour 1/3 of the can into another container, then replace that 1/3 of said can with Butyrate Thinner.
If you want longer drying time, instead of thinner use Toluene/Toluol. If you want faster drying time, cut it with straight Acetone.

Brodak Sealer is almost exactly the same as Aero Gloss, but needs about 10% thinner in the mix. Brodak dopes are actually repackaged full-scale aircraft Randolph Dope.
Brodak makes a "Primer" that is really close to Aero Gloss Balsa Fillercoat.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL
, if you have to ask what is "NORMAL" , you probably aren't !

Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, and HAVOC !
Reply With Quote