02-16-2009, 11:38 PM
|
|
BARCLONE Rocketry
|
|
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
|
|
A First Answer to the Challenge
Solo,
Here are three very basic, easily-buildable single-engine designs that meet your criteria. They are all ST-10 size models, which means they should have a nice "feel" in their hands. Not too small, like a BT-20 or ST-7 design, and not too large, like a BT-55 or ST-13 design. All of these use a standard 36" x 1/8" rod for launch.
The fin pattern is slightly modified from what RockSim offered. They are larger, and they are 1/8" thick balsa. That should also be a plus for small fingers, in that it has a bit more ruggedness when being handled.
XFNC Challenge #1:
Length: 21.10"
Diameter: 1.04" (ST-10)
Fin Span: 6.04"
Weight: 1.04 oz
A10-3T.....292'......Dv 8 FPS......Deploys on the way UP
XFNC Challenge #2:
Length: 31.10"
Weight: 1.42 oz
A10-3T......205'......Dv 8 FPS......Deploys on the way DOWN
XFNC Challenge #3:
Length: 29.10"
Weight: 1.36 oz
A10-3T......217'......Dv 5 FPS......Deploys AT APOGEE
|