View Single Post
  #776  
Old 12-14-2006, 05:05 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default Andromeda Update

Well, a prototype now exists for the Andromeda, needing only the paper skins and primer before final assembly. I'm giving this model a preliminary Skill Level 3 for those fins. The fin structure really needs those paper skins for reinforcement; they're quite fragile even using 1/8" balsa sheet. Once the fins are glued to the shrouds, they should gain some strength. I may have to lay out the design differently for a future attempt. When I get the skins on this one, I might poke a few holes through the paper and let the CA wick through the surface to form "rivets".
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote