09-02-2019, 10:41 PM
|
|
Officially Middle-Aged Rocketeer
|
|
Join Date: Mar 2005
Location: Portland, OR
Posts: 1,356
|
|
Quote:
Originally Posted by Mark II
Question about the Excalibur: were all of the fins the same size? The reason I ask is because two of them go onto the parachute tubes. If all of the fins were the same size, the two on the parachute tubes would stick out appreciably more than the two that are bonded onto the main tube.
.....Snip question re the Competitor.....
|
Reviving an old thread: Yes, all 4 fins on the FSI Excalibur are the same size,
though a true clone must have one side cone exactly 2/10ths of an inch shorter than the other.
S.
__________________
SAM #0031
|