View Single Post
  #10  
Old 01-02-2009, 05:13 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default First batch of Transitions and Tail Cones

This first file covers the Series 085 and Series 10 Tail Cones, and the list of standard transitions from the original file. Unless you just want to get a batch of Semroc items into RockSim, hold off on installing this file. Wait until a full set of parts is posted.

Bill, one change from the other files you will need to make is the precision of one column. The "Rear OD" column needs to be set at 4-digit precision if you try creating the reversed nose cones. The OD value needs to be set at 0.0001". This value gives RockSim something to chew on, while not being large enough to be noticed visually.
Attached Files
File Type: csv TRDATA_Semroc.csv (4.9 KB, 301 views)
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote