03-25-2005, 10:02 PM
|
|
Middle-Aged Rocketeer
|
|
Join Date: Mar 2005
Location: Warwick, NY
Posts: 363
|
|
Quote:
Originally Posted by Ltvscout
Yes, that would be great if you could send that info to me, Drew. I'll post it on YORP.
|
Scott and Bill,
Here's a pic of the Toe. I got the patterns from Fred at Excelsior; they come along with his repro decals. You should ask him if he's willing to share the patterns. The rest of the instructions are on Jim Z's site. This is a great one. My kids were hysterical when they saw it.
BTW, I finished decaling the body of the Interceptor, but had to give the nose cone another coat of white because it was still a little off. So of course I rushed to do it today in the humidity and it came out awfully. One step forward, two steps back. Attached is a picture of the body. Also a shot of my Sprite clone. Those balsa pieces on the outside of the ring are a pain. I am really disappointed by the vent hole on mine; I couldn't get it really round - too far up the tube to use a hole puncher. I have delusions of painting it white with the pinstripe-y red trim like the picture with the plans on Jim Z's site
Drew
|