#1
|
||||
|
||||
The New "FS2" from 3D Rocketry is now Available!!
The New 54mm x 31.5" "FS2" Kit Comes With:
9.5"- LOC Plastic Nose Cone 22"- LOC Fiber Body Tube 8"- LOC 29mm Fiber Motor Tube 4- 1/8" Birch Plywood Surface Mounted Upper Fins (Optional) 4- 1/8" Birch Plywood Thru the Wall Fins 2- 3/16" Birch Plywood Centering Rings 3" Baffle Kit With 3/16" Eyebolt, Nuts and Washers 3" of 1/4" Fiber Launch Lug $34.95 + Shipping Rocket Kit Only! Additional Parts Available on Online Parts Page. |
#2
|
||||
|
||||
I have updated the Rocksim file and instructions to include the upper fin set.
Also adding a kit pic. |
#3
|
||||
|
||||
What is the reccommended power ?
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
#4
|
||||
|
||||
All my 2.2" kits are designed for all 29mm "F" motors and smaller "G" motors. They can be upgraded with a payload/electronics bay starter with the exception of the Circulus kit. With the E-bay starter and dual deploy hardware you could drop an "H" motor and recover it safely.
"F" motor up to 1600 ft. "G" motor up to 3000 ft. "H" motor close to 4000 ft. I recommend using an "F" motor for first flights. Last edited by Slickwilly : 01-03-2015 at 08:00 AM. |
#5
|
||||
|
||||
My son is doing a build thread on the Rocketry Forum under rocket reviews.
|
#6
|
||||
|
||||
He's doing a very nice job.
|
#7
|
||||
|
||||
Go Nate!
|
#8
|
||||
|
||||
<==={
|
Thread Tools | Search this Thread |
Display Modes | |
|
|