#11
|
||||
|
||||
Booster for Aerobee 150 (2006)
This was originally posted as the booster section of a full-stack Aerobee 150 Standard. This piece can be used with the other A150's in the series.
Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 Last edited by CPMcGraw : 01-12-2011 at 06:07 PM. Reason: 2D Image not showing anything |
#12
|
||||
|
||||
Loadcat (2009)
This one completely slipped between the cracks and failed to get mentioned in the lists. It uses ST-11 tubing for the payload section.
Length: 25.70" Diameter: 1.17" (ST-11) Fin Span: 3.66" Weight: 1.49 oz A8-3........187'......Dv 5 FPS B4-4........465'......Dv 10 FPS B6-4........473'......Dv 14 FPS C6-5Q......1021'......Dv 18 FPS Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#13
|
||||
|
||||
Shuttle Exeter (2003)
From the prehistoric days...
Length: 15.95" Diameter: 0.976" (BT-50) Fin Span: 6.09" Weight: 1.63 oz A8-3........165'......Dv 13 FPS A10-3T......180'......Dv 14 FPS B4-4........456'......Dv 16 FPS Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#14
|
||||
|
||||
Scimitaur (2003)
Another Gyroc-style of model. You can see the "B5 Shadow" styling in the layout. Black, pointy, and eee-vill...
Length: 12.875" Diameter: 0.976" (BT-50) Fin Span: 6.74" Weight: 0.71 oz Best engine is the 13mm A3-4T. Original design called for 18mm engines, but the Dv numbers were far too high. Avg. Altitude now is 435'. Avg Dv is 24 FPS. Streamer and break-apart recovery. Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#15
|
||||
|
||||
EVModels A-10 Goony Hog (2005)
Round Seven of the catalog did not have a link for a RKT file for Eric's design, so I'm posting the copy I have on my computer here as a placeholder link.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#16
|
||||
|
||||
EVModels Knightwing (2005)
Again, this was presented on YORF but I'm not spotting the link. Probably in the 'Workbench | Projects' area (pre-dating BARCLONE).
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|