#21
|
||||
|
||||
I bought an odd assortment of parts about 20 years ago, and the body and nose cone of the Stealth were included. No other parts for it.
I just looked at the link to the plans. I have the main pieces. Cutting the balsa pieces would be pretty simple since the balsa sheet with wings/fins is shown in the plans. I’d either use epoxy, or Beacon Fabri-Tac to attach the wings. I have had good luck with the latter. It has acetone so the plastic should soften and adhere well to paper or wood.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#22
|
|||
|
|||
Estes Stealth needs fins
Hi, does anyone know if there is a set of laser cut fins available for this model? I have two Stealth's and both need new fins. I have some of the original fins but am missing most of the smaller one's. If you know of some that might be available please post the source. Thank You,
__________________
Neal Miller Master Blaster NAR# 58296 |
#23
|
||||
|
||||
Quote:
I cannot imagine anyone offering Stealth fin sets for sale. It’s such a rare product, the market would be tiny. But … eRockets sells laser-cut fin sets. They might be willing to cut a set if you sent them the dimensions, or the link to the plans that shows the balsa sheet layout. However, I think it’s going to be pretty pricey if they would agree to make them.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
Thread Tools | Search this Thread |
Display Modes | |
|
|