#21
|
||||
|
||||
But does the paper grain have to match the balsa grain???
__________________
Gravity is a harsh mistress SAM 002 NAR 91005 "The complexity of living is eminently favored to the simplicity of not." |
#22
|
||||
|
||||
Quote:
Darn, after all that sanding you can still see the stubs!
__________________
Don NAR 53455 "Carpe Diem" |
#23
|
|||
|
|||
Quote:
I like the old school colors. I painted most of my models with flat black and either fluorescent orange or fluorescent red back in the day. Looks good! .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
#24
|
||||
|
||||
Talk about resurrecting an old thread......
I found my Mini-Allegro in the attic as I was clearing stuff. The paper laminate was pealing off the fins. I couldn't even remember what rocket it was. Well, I fixed the fins and found out it was an Ace rocket (after going through my plans). I decided that wouldn't happen again. So, I had a friend do some vinyl decal work for me.....
__________________
Don NAR 53455 "Carpe Diem" |
#25
|
||||
|
||||
Quote:
The PDF was never posted . . . I am interested ! Dave F. |
#26
|
||||
|
||||
The file exceeds the 2mb limit so I can't post it. PM your email and I'll send it to you.
__________________
Don NAR 53455 "Carpe Diem" Last edited by barone : 05-12-2021 at 07:09 PM. |
#27
|
||||
|
||||
But.....here is the instructions for the 3X18 Mini Allegro....
__________________
Don NAR 53455 "Carpe Diem" |
#28
|
|||
|
|||
Quote:
Any files you have over 2mb should be emailed to me to post. Thanks!
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
#29
|
||||
|
||||
I built the ACE Mini-Allegro 4x18mm kit back in the early '80s while stationed in Michigan. Original colors were light gray and red. After many flights and moves, I repaired and repainted it. I plan to start flying it again after standing down for the pandemic. I usually fly with two C6-5s and two C6-7s to stagger the ejection charges. Still using the original parachute. Looking to use the new Estes Startech igniters. The DARS system will light just about any starter.
Chas
__________________
Charles Russell, MSgt,USAF (ret.) NAR 9790, Lvl 1 SAM "Balls Three" |
#30
|
|||
|
|||
Here are the plans and templates for the ACE 4x18 Mini-Allegro as supplied to me by Don Fent (barone). Thank you, Don!
If you look at the first post of this thread Don lists the Semroc parts he used back in 2011. Unfortunately, I doubt the new Semroc makes these parts anymore. https://www.oldrocketplans.com/ace/ACE_Mini-Allegro.pdf
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
Thread Tools | Search this Thread |
Display Modes | |
|
|