#1
|
|||
|
|||
BT-50 to BT-60 Transition
This 3D object is a transition from Este BT-50 tubing to BT-60 tubing. The distance between the two sizes of tubes (transition taper length) is 2.0 inches (50.8mm).
There are three models: 1) Solid, 2) Solid with 1/8" (3.175mm) hole to allow for screw eyes to be fastened to it, 3) Hollow. You can download this model from Thingiverse for free and print it out on your 3d printer https://www.thingiverse.com/thing:4894927 |
#2
|
||||
|
||||
Once again thanks. I'm sure this will come in handy. Please don't stop making these great contributions to our hobby.
|
#3
|
|||
|
|||
I'll keep designing 'em!
|
#4
|
||||
|
||||
Thanks for providing a valuable resource to all the site members !
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
Thread Tools | Search this Thread |
Display Modes | |
|
|