|
#1
|
|||
|
|||
Quest Falcon kit
I noticed on the Quest website that there is a new Falcon kit with a new livery. Can’t seem to find it anywhere though. Has anyone seen this kit for sale anywhere?
|
#2
|
|||
|
|||
I purchased the revised Falcon kit direct from Quest several months ago.
__________________
Bob S.A.M. # 0014 |
#3
|
|||
|
|||
I picked one up at a HobbyTown USA a couple months ago. Built it, launched 3 times, D22-7, E26-7, D22-7. The last flight was never seen coming down. It's an improvement over the old kit, but the cool looking decals were the best part. Though I got them on OK, the vinyl they're made of is really too stiff. The included 18-24mm adapter doesn't work if built to the instructions, and has the soft yellow 18mm motor tube, but I didn't expect to use it anyway. The chute material is improved, less stiff than the old material, but the included shock cord is way too short. And I really wish the fin can was white instead of yellow, could've got away with no painting if it was white.
Anyhow, it flies nicely on the 24mm Q-Jets.
__________________
Paul If we weren't all crazy, we would go insane - Jimmy Buffett NAR #87246 www.wooshrocketry.org Last edited by PaulK : 06-19-2022 at 08:19 AM. |
#4
|
|||
|
|||
I'm curious as to what it uses for centering rings With the plastic fin can
__________________
Jeffrey Deem NAR16741 CIA section 527 |
#5
|
||||
|
||||
Who makes a D22-7 and E22-7 ??
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
#6
|
|||
|
|||
Quote:
Those are the new(ish) 24mm Quest by Aerotech QJets - though they make an E26 not an E22, which I assume is a typing error by the person who posted that entry in this thread. They’re fun motors - at least the E26 is, I haven’t used the D22 yet - not really more power than a BP Estes E but they burn faster and sound different plus they’re 70mm long versus 95mm like the Estes E. |
#7
|
||||
|
||||
I just finished up the Quest Falcon build on my blog:
http://modelrocketbuilding.blogspot...abel/Q%20Falcon I address a concern about the stickers and how to fit them around a molded "rod" at the fin root edge. The 18mm engine mount should be made with the centering rings at the ends of the motor mount tube. The lower ring would need a notch cut out to allow engine hook flex.
__________________
Hans "Chris" Michielssen Old/New NAR # 19086 SR www.oddlrockets.com www.modelrocketbuilding.blogspot.com http://www.nar.org/educational-reso...ing-techniques/ Your results may vary "Nose cones roll, be careful with that." Every spaceman needs a ray gun. Look out - I'm the Meister Shyster! |
Thread Tools | Search this Thread |
Display Modes | |
|
|