Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Swap Shoppe > Wanted: Dead or Alive!
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-26-2020, 12:50 PM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 6,178
Default Will trade.......

One (1) full 3.5 oz. jar of Aerogloss Sanding Sealer for one (1) full 1.0 oz bottle of GENUINE Tenax7r.

Serious inquiries only, please.

Thanks!
__________________
-Just in case you ever wondered, Yoda’s last name was LayHeeHoo.

-Don't mistake politeness for weakness.


NAR# 94042
SAM# 0078
Reply With Quote
  #2  
Old 03-26-2020, 01:06 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Michigan
Posts: 9,687
Default

Unfortunately I have wayyyyyyyyy too much Aero Gloss Sanding Sealer and not nearly enough Tenax 7R.
Down to two bottles.
MicroMark "Same Stuff" is EXACTLY the same cement. it is 100% Methylene Chloride.
So is Plastruct Bondene. Really.
Pick up either of those and fill your empty Tenax bottle.

About the only thing I will trade a bottle of Tenax old stock for is a 8oz or above full or partial good CAN of Aero Gloss Cessna Green or Curtiss Blue. Those are missing from my collection.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!
No DIRECT and MEASURABLE Harm=NO Foul advocate

If you are NOT FLYING LOW in the left lane, you need to GET THE #$&@ OUT of it !

Yes, there is such a thing as NORMAL
, if you have to ask, you probably aren't
!
Reply With Quote
  #3  
Old 03-26-2020, 01:18 PM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 6,178
Default

I didn't know that! Thanks for the info.
__________________
-Just in case you ever wondered, Yoda’s last name was LayHeeHoo.

-Don't mistake politeness for weakness.


NAR# 94042
SAM# 0078
Reply With Quote
  #4  
Old 03-26-2020, 01:20 PM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 6,178
Default

I just checked my shelf. I have a FULL bottle of Plastruct Bondene. (yay!)
__________________
-Just in case you ever wondered, Yoda’s last name was LayHeeHoo.

-Don't mistake politeness for weakness.


NAR# 94042
SAM# 0078
Reply With Quote
  #5  
Old 03-26-2020, 01:27 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Michigan
Posts: 9,687
Default

There ya go...back in business.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!
No DIRECT and MEASURABLE Harm=NO Foul advocate

If you are NOT FLYING LOW in the left lane, you need to GET THE #$&@ OUT of it !

Yes, there is such a thing as NORMAL
, if you have to ask, you probably aren't
!
Reply With Quote
  #6  
Old 03-27-2020, 06:48 AM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 6,178
Default

My bottle of Plastruct Bondene is probably 10+ years old. It still smells “bright”, but does it ever expire?
__________________
-Just in case you ever wondered, Yoda’s last name was LayHeeHoo.

-Don't mistake politeness for weakness.


NAR# 94042
SAM# 0078
Reply With Quote
  #7  
Old 03-27-2020, 07:20 AM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Michigan
Posts: 9,687
Default

No. It doesn't "expire".
The only way it could would be to evaporate.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!
No DIRECT and MEASURABLE Harm=NO Foul advocate

If you are NOT FLYING LOW in the left lane, you need to GET THE #$&@ OUT of it !

Yes, there is such a thing as NORMAL
, if you have to ask, you probably aren't
!
Reply With Quote
  #8  
Old 03-27-2020, 11:43 AM
LeeR's Avatar
LeeR LeeR is offline
Retired with Way Too Many Kits
 
Join Date: Jun 2007
Location: Colorado
Posts: 2,327
Default

Yesterday I realized just how strong the sanding sealers really are. I'm using Brodak now, and think its pretty comparable to Aerogloss, which I haven’t used (or seen in hobby stores here) for years.

Normally I’m sealing some balsa fins on a relatively small rocket. Or maybe just a nose cone. The jar is open a few minutes, and the amount brushed on is pretty small. I’ve never noticed a lingering smell when I return to my basement rocket room. Yesterday I applied sanding sealer to an Estes Phoenix and an upscale Skyhook (using 2.5” Panavia, with replacement basswood fins). That is a LOT of surface area! I used a wide brush, so the coats went on quickly, and the jar wasn’t open very long, so I didn’t really notice the smell. But when I went back to my rocket room later, I was surprised by the overwhelming smell. I opened the adjoining wood shop’s window, moved the rockets into the wood shop next to the window, and ran a house fan pointed outside to clear the air. The shop has doors to close it off, and the smell was gone when I checked a few hours later.

I need to change my habits. I’ll be doing sealing outside, or out in the garage, for anything large. If I seal anything small inside, I’ll start using the wood shop with fan running, and I’ll make sure I close the shop doors.
__________________
Lee Reep

Projects: Super Sky Hook, Super X-Ray, Semroc Spaceman, Estes Phoenix, Big Daddy, Enerjet 1340, Enerjet 1640 (downscale 2250)
Awaiting Paint: Estes Saturn 1B
Last Completed: SuperNova
Reply With Quote
  #9  
Old 03-27-2020, 06:36 PM
Jerry Irvine's Avatar
Jerry Irvine Jerry Irvine is offline
Freeform rocketry advocate.
 
Join Date: Jan 2008
Location: Claremont, CA "The intellectual capitol of the world."-WSJ
Posts: 3,741
Default

Based on my experience inhaling fumes for 20 years starting as a minor, I declare you all drug dealers.
__________________
Exemptions not regulations ACHIEVED. U.S. Rockets instaship. http://bit.ly/1aca7mA Model rocketry is as safe as safe can be defined in human existence. Bow and pray: GH Stine, Orville, Vern, Lee, Lonnie, Carl, etc. No, really. U.S. Rockets released first moonburner Toy Rockets G30, TRA first certified motor: H, invented LMR, HPR, Firestarter, reloadables 1-90, and now . . . ACHIEVED. LDRS first pre-HPR motor 38mm I200!!
Reply With Quote
  #10  
Old 03-27-2020, 06:50 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Michigan
Posts: 9,687
Default

That's a BIT harsh, Jerry.
I prefer to call it a "side effect" of a legal product.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!
No DIRECT and MEASURABLE Harm=NO Foul advocate

If you are NOT FLYING LOW in the left lane, you need to GET THE #$&@ OUT of it !

Yes, there is such a thing as NORMAL
, if you have to ask, you probably aren't
!
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 12:50 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2020