Exactly correct! Two good-sized boxes of 3D-printed parts, to be exact. The seller (NASAModels - he has actually done commissioned work for NASA in the past) offers "raw" 3D printed kits, 3D printed kits where the filling and sanding is done (ready to paint/assemble), and 100% finished kits. Obviously, prices go up as he does more of the work. I opted for the "raw" kits to save a little money. What's a little filler and sandpaper, right?

Some of the parts, especially large parts, are printed traditionally and require more work for a smooth finish. But some are done on a resin printer, and are basically "paint ready" out of the box.

Overall, a fun build!

you said tiny human...hahahahah

__________________
"Old Rocketeer's don't die; they just go OOP"

The latest concept renderings and photos of the actual build have it as being painted white with black roll patterns and they're awfully keen to keep us from using old renderings in any materials we create. I've seen it change colors/markings three times already.
https://www.nasa.gov/exploration/sy...ign-review.html

__________________
Retro-grouch

That looks a heck of a lot better than the orange foam core! I've seen a few drawings with it painted white, but I assumed it was done just to create a historical link to Saturn. I didn't realize they may actually be thinking about painting the core.

A black band might be nice at the top of the second stage right below the transition, or maybe black blocks like the 500F. It would be so close to the interstage roll pattern that it might not look right.

__________________
I love sanding.

You may be getting your wish again. Build gallery here:
https://www.nasa.gov/exploration/sy...ion-set1-slide2

__________________
Retro-grouch

Nothing in those photos implied a white core. White-painted composite sections, but not white on the actual core. The cartoon was white, but lots of cartoon depictions of SLS have been white. I'm still betting against it. Painted SOFI (spray-on foam insulation) is just heavy and expensive. Reference the Shuttle Program with one painted ET (or was it two?). The only engineering reason I can think of for doing it would be to provide a coating better suited to mitigating electrostatic discharge. So, I suppose there's a chance!

For what it's worth, SOFI is pale yellow when first applied. It gradually turns more and more orange - almost brown - when exposed to UV light. Bond-on foam insulation (BOFI) maintains a more yellow appearance. Looking at the Green Run booster, I think there's quite a bit of BOFI on there too.

Just found this picture of a test from this week. Looks similar to the shuttle foam insulation.

Attached Thumbnails

 

__________________
I did not notice the passers by, and they did not notice me.

Two shuttle missions...STS-1 and 2.

Earl

__________________
Earl L. Cagle, Jr.
NAR# 29523
TRA# 962
SAM# 73
Owner/Producer
Point 39 Productions

Rocket-Brained Since 1970

Thanks Earl!