|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Boyce Aerospace Awesome 1/46 Gemini Titan kit is here!!!
Recreate America's third manned space system with the Boyce Aerospace Hobbies 1/46th Scale Gemini Titan Builders Kit
Once completed, the Gemini Titan Builders Kit measures 28 inches long with a diameter of 2.6 inches (BT-80) and weighs 10.3 oz This 1/46th scale model rocket features detailed cluster motor mount with rear tank bulkhead, engine truss work, turbo-pump detail and screw on engine bell motor retainers Motors - Twin 18 mm motor cluster Detailed interstage with visible first stage upper tank dome Bayonet catch between the first and second stage Second stage display motor detail Detailed three part Gemini capsule with transition Kit features 35 quality 3D-printed ABS parts Our Builders Kit uses 4 clip on clear laser cut fins for flight Finish your Gemini Titan with detailed 3-page full body wrap vinyl decals Recommended Engines: 2 x Quest Q-Jet C12-4 (Altitude - 335 feet) 2 x Quest Q-Jet D16-6 (Altitude - 455 feet) 2 x AeroTech single use D10-5 (Altitude - 769 feet) Additional items required to complete Builders Kit: 2) 30" parachutes 2) 18" BT-80 Body Tubes 1) 18" BT-20 Body Tube 2) 18" long shock cord (1/8" or 1/4") Step-by-step instructions included The Boyce Aerospace Hobbies 1/46th Scale Gemini Titan Builders Kit recreates America's third manned space system. The Gemini Titan mated the two astronaut Gemini capsule with the larger Titan two stage booster. The Gemini Titan launch system was instrumental in America's race to a moon landing as we used it to learn orbital rendezvous, docking, space walking and the effects of long term space flight on humans. Our Gemini Titan model showcases incredibly detailed parts such as the cluster motor mount with rear tank bulkhead, engine truss work, turbo-pump detail and screw on engine bell motor retainers. This Builders Kit also includes a detailed interstage with visible first state upper tank dome. There is a bayonet catch between the first and second stage and the second stage boasts display model details. The Boyce Aerospace Gemini Titan Builders Kit is comprised of 35 high-quality 3D-printed parts and 4 clip on clear laser cut fins for flight. Your Builders kit requires additional parts, so be sure to check your included instructions for a full list. Give your model the finishing touch with impressive 3-page full body wrap vinyl decals. Just $99.95
__________________
======================= If the Sky is the Limit, then, why is there Footsteps on the Moon? ======================= |
#2
|
||||
|
||||
I ordered mine today! Can't wait!
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#3
|
||||
|
||||
Hope to order mine tomorrow
Also, I would think that the new Estes Super C motors, C5-3 would also work with this kit?
__________________
======================= If the Sky is the Limit, then, why is there Footsteps on the Moon? ======================= |
#4
|
||||
|
||||
Looks like a real good'n !
I would think the C5-3 would work great. Each is rated to lift 8oz, so 2x should be plenty.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
#5
|
||||
|
||||
Quote:
I was looking at the kit on my phone last night and wondered what that beast is going to weigh. It's a BT-80 sized kit with lots of extra detail. I sure hope the C5-3 lofts it sufficiently!
__________________
I love sanding. |
#6
|
||||
|
||||
Boyce's website says 10.3 oz. Mine will probably be a little heavier since I tend to build heavy just about everything (unless it's a glider.)
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#7
|
||||
|
||||
10.3oz they say
__________________
======================= If the Sky is the Limit, then, why is there Footsteps on the Moon? ======================= Last edited by Flash : 02-14-2020 at 11:53 AM. |
#8
|
||||
|
||||
I would think as long as it weighs under 16oz, 2xC5-3 would be ok.
2 Aerotech full 20 n-sec D10s or D24s would be even better but far more costly. Don't even think about using lame-o C6-3s. I would probably lean toward the Aerotech D24s due to blue thunder propellant easily igniting in a cluster. I don't think I would want to attempt 2xD10 as White Lightning has more of a chance of a chuff, which is really lousy in clusters.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
#9
|
||||
|
||||
Quote:
Due to the cost of the kit, the effort we put into our space program scale models, and the limited recovery area, a pair of C5's sound perfect. Twin 30" chutes and rocket eating trees spell disaster with greater altitudes. I'm guessing based on the C12 numbers that the C5's might get 275-300'. I'd like to see it on a pair of real B14's for those tiny school yards and little league fields. Bill could probably do a flight on his B6-4 field with 'em. The real GT had a quick liftoff compared to the other manned launch vehicles...scale realism. lol
__________________
I love sanding. |
#10
|
||||
|
||||
At that weight I'm not sure it needs that much canopy for recovery. I'm guessing a pair of 24" parachutes would be enough--but I haven't crunched any numbers yet.
I hope the 3D printed parts are a little smoother than the Boyce Nike Ajax parts! I started a build thread on the Ajax late last year and I'm STILL trying to get the parts sanded smooth.
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
Thread Tools | Search this Thread |
Display Modes | |
|
|