Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > 3D Printing Asylum
User Name
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 09-11-2021, 10:44 AM
Jack Hydrazine Jack Hydrazine is offline
Join Date: May 2011
Posts: 217
Default BT-55 to BT-60 Adapter / Transition

Here's another 3D model you can download for free from Thingiverse and print on your 3D printer.
This 3D object is a transition from Este BT-55 to BT-60 tubing. The distance between the two sizes of tubes (transition taper length) is 2.2 inches (55.88mm). It is similar to the Estes TA-5560 (P/N 70028) transition/adapter.

There are eight models:
1) Solid,
2) Solid with a 3.2mm hole to allow for screw eyes to be fastened to it,
3) Hollow,
4) Hollow with end caps.
5-8) End caps fit the ends of the Hollow2 transition. One has 1/8 inch (3.2mm) holes for the attachment of eyebolts and the others do not.
Reply With Quote
Old 09-11-2021, 02:18 PM
Flash's Avatar
Flash Flash is offline
Semi-Pro Rocketeer TRA 10484 L2
Join Date: Apr 2007
Posts: 397

Thank you so very much!
If the Sky is the Limit, then,
why is there Footsteps on the Moon?
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -5. The time now is 07:53 AM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe 1998-2022