![]() |
#11
|
||||
|
||||
![]() I cut the Lower Spool Transition from the same Pinyon Pine as the Nose Cone. The Legs are made from 1/4" Plywood.
The transition fractured while turning it on the lathe and had to be glued before finishing it.
__________________
John Simmons a.k.a. "Lakeroadster" NAR 113985 My Fleet with Build Data: Lakeroadster's Rocket Shop Last edited by HenryMac : 02-26-2024 at 04:35 PM. |
#12
|
||||
|
||||
![]() Glad to help.
The F50-4 keeps the 1st flight under 500' too.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, AGITATION, CHAOS, TURMOIL, FIASCOS, AGGRAVATION, INSTIGATION, NUISANCE-ACTION, and HAVOC ! |
#13
|
||||
|
||||
![]() Wrap Time...
Swing Tests:
__________________
John Simmons a.k.a. "Lakeroadster" NAR 113985 My Fleet with Build Data: Lakeroadster's Rocket Shop Last edited by HenryMac : 03-04-2024 at 05:31 PM. |
#14
|
||||
|
||||
![]() Primer Day 1
I shot 3 coats of Rustoleum Automotive Primer 2 in 1 Filler & Sandable on the rocket. The body will need to be de-fuzzed (it's a technical term) and then re-primered. The plan is to shoot the rocket with Rustoleum Flat White, then apply wraps.
__________________
John Simmons a.k.a. "Lakeroadster" NAR 113985 My Fleet with Build Data: Lakeroadster's Rocket Shop |
#15
|
||||
|
||||
![]() Paint Day 1
Rustoleum Stops Rust Flat White
__________________
John Simmons a.k.a. "Lakeroadster" NAR 113985 My Fleet with Build Data: Lakeroadster's Rocket Shop |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|