#1
|
||||
|
||||
STL for BT-55 Transition.
Does anyone have an STL file for a BT-55 to a BT-50 transition?
If anyone can help me out thanks in advance. |
#2
|
|||
|
|||
__________________
KE7FIZ Nike Historical Society |
#3
|
||||
|
||||
I'm sorry but I have worked all day with openSCAD this program isn't in my wheelhouse.
VCP would it be possible to do one with a 55 to 50 with a 7/8'' taper length and post it on Thingiverse? Please. |
#4
|
|||
|
|||
I'm working on something for you.
|
#5
|
|||
|
|||
Here ya go, Mr. The Mole!!!!
This is a model of a BT-50 to BT-55 Tube Adapter and is designed to fit Estes BT-50 and BT-55 airframe tubing. There are five designs to download with varying transition lengths. 1) Transition length is 0.5" or 12.7mm 2) Transition length is 7/8" (0.875") or 22.23mm 3) Transition length is 1.0" or 25.4mm (similar to Estes TA-5055, Semroc SEM-TA-5055 and Balsa Machining Service TA5055 tube adapters) 4) Transition length is 1.5" or 38.1mm (similar to Semroc SEM-TA-5055L and Balsa Machining Service TA5055L tube adapters) 5) Transition length is 2.0" or 50.8mm The 'A" versions are solid while the 'B' have a 2.0mm hole in the center that runs the length of the object. https://www.thingiverse.com/thing:4744003 |
#6
|
||||
|
||||
Thanks, Jack Hydrazine I wish I had your skills. This 55 to 50 transition 7/8 inch is the size
that's used on some of the Dr Zooch Saturn 1b like the SA-5,6,7. Once again thank you. |
#7
|
|||
|
|||
You are quite welcome!
|
Thread Tools | Search this Thread |
Display Modes | |
|
|