|
#1
|
||||
|
||||
Suggestions!?!
I got some stuff in a clear plastic tube about 42" long and 3" diameter. Any ideas as for what to make out of it?!?
|
#2
|
|||
|
|||
Could be lots of things. Maybe a large map or drawing, or even a photo. If it's one of these, you could frame it and put it on a wall. If it's something else, perhaps you could post a picture and someone might recognize what that stuff is that was in the tube.
..oh, wait. You mean what could you use the tube for. |
#3
|
||||
|
||||
Super Scrambler, Super Apogee (II), Super Shrike, Super Icarus, the list goes on and on.
|
#4
|
||||
|
||||
The Super Icarus sounds good. Now, I'll have to get some measurements off the tube to see what parts I need. And how to scale the thing...
|
#5
|
||||
|
||||
Quote:
The Icarus was a BT-50 so it's roughly a 3X upscale. That would put it at just over 5 ft. tall. Sounds like you might be placing an order for a custom nosecone and bulkhead to Sandman (unless you have a lathe).
__________________
I love sanding. |
#6
|
||||
|
||||
Yeah, that's the problem. I think this tube is short for an Icarus. So, I can either make a lower engine section or a stubby version...
|
Thread Tools | Search this Thread |
Display Modes | |
|
|