|
#1
|
||||
|
||||
Noris Raketen
Oh how I wish I had done a tad more research on the manufacturer before I committed to purchasing a V1 kit !
Apart from the over long delivery time (almost 5 weeks), the almost total lack of communication between the vendor and myself concerning dispatch and delivery dates, the inability to accept foreign currency (ie Paypal or Visa) thus incurring bank fees for the transaction, the quality of the 'kit' and 'instructions' leave a lot to be desired, what with vague instructions (in german) missing parts (2) NO die or laser cut parts just a sheet of balsa and a hint at the shape of parts to cut and NO decals or specific positional details of markings. This is definitely not a kit for inexperienced rocketeers. I also wanted to build a V2 but after this purchase, I opted for the Estes variety and can't begin to describe the difference in quality and value between the two. As a result I'm not sorry to say that Noris Raketen are no longer on either my browse or purchase list and Estes, Apogee or Rocketarium will be my chosen suppliers from now on !
__________________
To please everybody is impossible..to piss most people off is a piece of cake......,,.I like cake |
#2
|
||||
|
||||
Sounds like you may have been just as well off to build completely from scratch. From the looks of a finished kit, it looks like I could build one with a few paper transitions and a generic balsa cone. Can you post a pic of the kit parts?
__________________
I love sanding. |
#3
|
|||
|
|||
Apogee usually has a few Noris Raketen kits. They're out of stock now, but you can still read their warnings about how different the kits are. They went so far as to rewrite the instructions in English. I do hope they get more and adapt them for the American market. It's nice to have foreign rockets to balance out a collection.
https://www.apogeerockets.com/Rocke...cket-Kits/Soyuz https://www.apogeerockets.com/Noris_Rocketry |
#4
|
|||
|
|||
I noticed that Noris has a Soyuz kit. Does any other manufacturer make one? My skill level isn’t up to that. I know that Dr. Zooch had one, but I was looking for something larger in size..
__________________
I did not notice the passers by, and they did not notice me. |
#5
|
|||
|
|||
Had a Discussion and I posted a picture of the kit and contents over her, back in 2012
https://www.rocketryforum.com/threa...92/#post-452545 Last edited by mikeyd : 06-19-2019 at 06:54 PM. |
#6
|
|||
|
|||
The Vostok is even more of a builders kit.
|
#7
|
|||
|
|||
Quote:
Britroc - so sorry to hear about your troubles with Noris Raketen. I ordered stuff from them years ago, so I definitely forgot how long it took them to respond. I agree with the negative comments on their Vostok and Soyuz kits. When I saw the built models at Apogee, I was far from impressed. That being said, one could say that most scale kits are just starting points. You can always add more detail, just as it is with plastic models. We've had countless discussions in this very forum about how to make the various Saturn V kits more accurate, especially when it comes to fin size. Another fabulous model which can be improved is the Fliskits Thunderbird (in which you have an interest, I believe). The Fliskits model is fabulous - especially the paper parts (offset cones, nozzles, etc). However, the main body tube is too short and the nose cone is MUCH too short. I tweaked mine a bit and think the result looks much closer to the real McCoy. As for the Noris V-1, it isn't much for scale accuracy since the motor is in the main body instead of the pulse-jet tube. Still, it can look pretty cool with some work. Again, I'd pay attention to what the dimensions SHOULD be. The only other Noris model I have built is the Bachem Natter. A weird little kit, where the nose cone, centering rings, and boattail make the tube non-circular in cross section. Some of the kit parts were cheap junk that had to be replaced, and the rear fins are oversized. Yet, at the end of the day, I think it looks cool! I hope your models come soon and you enjoy turning them into something special! |
#8
|
||||
|
||||
Frognbuff
Thanks for the message re Noris Kits but I am more concerned with the poor quality rather than their scale integrity. I had to source a main body tube as the one supplied was an atrocious fit with both the nose and boat tail mouldings, the instructions were completely misleading in more than one place and the balsa sheet supplied for wings etc was of a poor quality and thickness and no wing or tail positional details were shown on the plan. As an aircraft (all disciplines)/boat/helicopter and autogyro modeller of many years standing, I have had quite a few of my own designs published in plan form sans complaints thus far It comes as no surprise that Tim at Apogee does not wish to add this model to his saleable fleet and he would be better advised to offer a completely 'Apogee Designed' product. Bill UKRA 2053
__________________
To please everybody is impossible..to piss most people off is a piece of cake......,,.I like cake |
#9
|
|||
|
|||
I love the Noris kits and have built the Apogee version of the Vostok, Soyuz and Ariane. Also built the Natter directly from the Reich. No American kit manufacturer who wanted to stay in business would attempt such a kit, the idiot factor is way too high. This is no boring 3'4FNC, it's much worse, a no good stinking oddroc that only acts to scare the bejeezus out of the RSO
The poor Euros have to fly this thing on a D9! Lazy Mericans with their thick tubes, big motors , laser cut fins and hand holding instructions. The average German school girl can out drive most American men, so what should you expect the skill level of the Noris V1 builder to be? Assemble and finish your vacuform and cardboard with skill. Do the math and calculate your CP! Directions, who needs them, the Noris builder is better than that! The squishy tube was perfect for the Natter. The cardboard fins work fine but are not bulletproof to Yankee taste. Don't be afraid of a repair, super glue it back on at the field and fly it again because it is now even stronger. Make your modifications because you have big North American motors! This is no Kasserine Pass! We will beat them at their own model rocket game! Don't need fancy stuff, just give me some parts! Old World craftsmanship still exists. Patience and skill over lasercut convenience and thick tube comfort. Love your Noris kit for what it is and you will get many successful flights and it will look good too! Now I will have to go watch Patton again! |
#10
|
||||
|
||||
Sir
As an ex Royal Air Force veteran (22 years) I think my forebears taught the Germans all about aviation and getting their arses well and truly kicked sometime in 1940...... schpittfeur and all that ! After paying well over the odds for a poor quality 'kit' and paying even more for shipping and bank transfer fees, I would have expected a tad more communication from the vendor instead of "order seen" email with absolutely no dispatch advice given when requested. Guess I was a victim of rache einkaufen ?..........tally ho chaps...save me an egg for brekkers
__________________
To please everybody is impossible..to piss most people off is a piece of cake......,,.I like cake |
Thread Tools | Search this Thread |
Display Modes | |
|
|