#21
|
||||
|
||||
Quote:
That is a bummer, it sounds like an honest mistake on the part of someone who just did not know completely what she was dealing with. However...she should have checked the motor tube labels a bit more closely. I had a similar situation a few weeks ago with some vintage Xacto #10 blade packs. Seller listed ten packs of #10 blades. Packs looked very clean and vintage. Needed them for my Centuri-carried Xacto stock (I had only a pack or two of those blades and wanted a few more). Well, I won the bid for about $35 and got the blades about two weeks later. Turns out there were only about five packs of #10 blades; all the others were the much more common #11 blades, which I already had plenty of. On top of that, the five packs of #10 blades were not all full, either. I wound up with the equivalent of four full packs of #10 blades. Bottom line, the seller just did not look really close at all the packs to see if they were ALL #10 blades. I sent them a message back saying that in the future they REALLY needed to double check the items they were describing to ensure their listings were accurate. I told them I would not leave negative feedback, but that I would not leave any feedback at all. In hindsight, I should have probably left negative feedback, as that seller never even responded to my message at all. Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
#22
|
||||
|
||||
I'm keeping all the motors and got a $50 refund.
The good news : the B14s are from 1971 and 1972 and have DRILLED cores. The really GOOD ones.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
Thread Tools | Search this Thread |
Display Modes | |
|
|