#1
|
|||
|
|||
Fin dimensions for Estes Omega
I am cloning an Estes Omega and need the fin dimensions for booster and sustainer fins. I printed the scans from JimZ's website, but the fin pattern is smaller than the original.
If I can find out even the root edge lengths for each that would be good enough to get the fins sized right. |
#2
|
||||
|
||||
Quote:
I'll measure one of mine when I get back from camping out with the troop this weekend. Joe W |
#3
|
|||
|
|||
Quote:
Thanks in advance! Have a great time camping |
#4
|
|||
|
|||
Estes Omega Booster
3.25" Root Chord Length 2.25" Tip Chord Length 2.50" Semi Span Estes Omega Sustainer 2.80" Root Chord Length 1.90" Tip Chord Length 2.0625" Semi Span .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
Thread Tools | Search this Thread |
Display Modes | |
|
|